How much oil does a 2018 Subaru Crosstrek take?

Oil Capacity for 2018 Subaru Crosstrek
The 2018 Subaru Crosstrek has an oil capacity of 4.6 US quarts when the filter is included.
The required oil type for the 2018 Subaru Crosstrek is full synthetic at SAE 0W-20 for all temperatures. This vehicle came equipped with a 2.0L 4-cylinder engine across all trim levels. It is important to note that the vehicle will need to have its oil changed every 7,500 miles, but it comes equipped with an oil life monitoring system that will indicate when it’s time for a change. Additionally, the cost of an oil change for the Crosstrek is between $180 and $250 for labor and parts, and it is recommended to get an oil change every 3,000 to 5,000 miles.
It’s also worth mentioning that the vehicle only requires 5.1 quarts of oil, despite some dealers charging for 6 quarts, which may be necessary if the Crosstrek burns oil.

What oil does a 2018 Subaru Crosstrek take?

0W-20 synthetic oil
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.

What oil is recommended for Subaru Crosstrek?

0W-20 synthetic oil
The right Subaru Crosstrek oil type! The recommended Subaru Crosstrek oil type for the most recent generation is 0W-20 synthetic oil.

Can I put 5w30 instead of 0w20 Subaru?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

Can I use 5W 20 instead of 0W-20?

Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.

How much oil does a 17 Crosstrek 2.0 take?

A 2017 Subaru Crosstrek takes 5.1 quarts of oil.

How much oil does a Subaru 2.0 take?

4.6 quarts
Oil Grade: SN

Viscosity:	0W-20 (All TEMPS)
Capacity:	4.6 quarts (with filter). After refill check oil level.
Torque:	31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug.
Notes:	(1) Synthetic oil is required.

What oil does a Subaru Crosstrek 2.0 take?

0W-20 synthetic oil
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.

What oil is best for Subaru Crosstrek 2018?

0W-20 synthetic oil
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.

How many quarts of oil does my Subaru Crosstrek take?

4.7 quarts
As for engine oil capacity, the Crosstrek can hold 4.7 quarts of oil. Keep in mind, though, that this quantity is only an estimate, and is based on when the oil is changed with an oil filter. After filling the engine with oil, the level should be checked to make sure it’s at the optimal amount.

How often does a 2018 Subaru Crosstrek need an oil change?

After 6,000 miles or six months, it’s time for your first oil change. At this service appointment, our technicians will replace your car’s engine oil and engine oil filter. We’ll also inspect and rotate the tires. Your Crosstrek will need this service every 6,000 miles, or about twice a year.