Oil Capacity for a 2008 Ford F250 Diesel
The oil capacity for a 2008 Ford F250 diesel depends on the specific engine model. Based on the information available, the 6.0 Powerstroke diesel engine, which is commonly found in the 2008 F250, has a gargantuan oil capacity compared to “normal” trucks. The experts recommend changing the oil every 7,500 miles under normal operating conditions and every 5,000 miles under severe operating conditions. The extended life, heavy-duty oils can allow for oil changes every 10,000 miles or more.
Unfortunately, the exact oil capacity for the 6.0 Powerstroke engine is not mentioned in the search results. However, it is important to note that the oil capacity can vary depending on the specific engine model and any modifications that may have been made. To get the most accurate information, it is recommended to consult the owner’s manual or contact a Ford dealership for the specific oil capacity of your 2008 Ford F250 diesel.
If you have a different engine model, such as the 5.4L or the 6.4L, the oil capacity may be different. For example, the oil capacity for a 2008 Ford F-250 5.4L engine is 7 quarts. It is always best to refer to the owner’s manual or consult a Ford dealership for the most accurate information regarding oil capacity for your specific engine model.
Oil Recommendations and Tips
When it comes to choosing the right oil for your 2008 Ford F250 diesel, there are a few factors to consider. The search results mention different oil recommendations and preferences from enthusiasts and experts. Some Ford Powerstroke enthusiasts have switched to running full synthetic 5W40 oil in their 6.0 Powerstroke engines. Others recommend using 15W40 Rotella synthetic blend or Amsoil 5W-40.
Here are some general tips to keep in mind when changing the oil in your 2008 Ford F250 diesel:
1. Consider the operating conditions: If you frequently operate your vehicle under severe conditions, such as towing heavy loads or driving in extreme temperatures, it may be beneficial to use a heavier-duty oil or change the oil more frequently.
2. Consult the owner’s manual: The owner’s manual will provide specific recommendations for oil type and viscosity based on your engine model.
3. Consider professional advice: If you’re unsure about which oil to use or have specific concerns about your engine, it’s always a good idea to consult a Ford dealership or a qualified mechanic for personalized recommendations.
Remember to follow proper oil change procedures and dispose of used oil responsibly. If you’re unsure about the oil change process, it’s recommended to consult the owner’s manual or seek professional assistance.
I hope this information helps! If you have any further questions, feel free to ask.
Contents
- How many quarts of oil does a 2008 Ford f250 6.4 diesel take?
- How much oil does a 6.4 Powerstroke take?
- How many quarts of oil does a f250 diesel take?
- How many quarts of oil does a f250 Super Duty Diesel take?
- How much oil does a f250 6.7 diesel take?
- How often do you change the synthetic oil on a 6.4 Powerstroke?
- How much engine oil does a 6.7 L Powerstroke take?
- How much oil does a 2008 Ford F-250 Super Duty diesel take?
- What oil does a 2008 6.4 Powerstroke take?
- What is the best oil to run in a 6.4 Powerstroke?
How many quarts of oil does a 2008 Ford f250 6.4 diesel take?
15 quarts
Engine Oil
15W-40 – 5W-40 or 15W-40 must be used for heavy duty driving and trailer towing. Capacity: With filter 15 quarts. After refill check oil level.
How much oil does a 6.4 Powerstroke take?
15 quarts
How Much Oil Does a 6.4 Powerstroke Take? The 6.4 Powerstroke engine takes 15 quarts of oil. For operating conditions over 20 degrees Fahrenheit, 15W-40 oil is recommended, for below 20 and above 0 degrees, 10W-30 oil is recommended, and for above -20 degrees and below 0 degrees, 5W-40 oil is recommended.
How many quarts of oil does a f250 diesel take?
13 quarts
15W-40 – Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. Capacity: With filter 13 quarts.
How many quarts of oil does a f250 Super Duty Diesel take?
13 quarts
15W-40 – Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. Capacity: With filter 13 quarts.
How much oil does a f250 6.7 diesel take?
What Is the Ford 6.7 Power Stroke Oil Capacity? As a larger truck engine, the Ford 6.7 diesel oil capacity is higher than smaller models. Starting with products manufactured in 2011, it takes 13 quarts, with filter, for a complete refill.
How often do you change the synthetic oil on a 6.4 Powerstroke?
every 7,500 miles
Oil and Filter – Oil change service intervals should be completed as indicated by the instrument cluster message center or every 7,500 miles. Fuel Filter Change – Change every 3rd oil change or every 15000 miles(24,140 km) or as indicated by the message center which ever comes first.
How much engine oil does a 6.7 L Powerstroke take?
15.0 qt
Capacities and Specifications – 6.7L Diesel
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 15.0 qt (14.2 L) |
| Engine coolant (primary high-temperature cooling system loop) | 35.1 qt (33.2 L)1 |
| Engine coolant additive (primary high-temperature cooling system loop) | 48 fl oz (1.41 L)2 |
How much oil does a 2008 Ford F-250 Super Duty diesel take?
The truck holds 15 qts. and is speced for 15w40 or 5w40 from Ford.
What oil does a 2008 6.4 Powerstroke take?
Balancing density and viscosity, 5W-40 is often an ideal solution for a 6.4 Powerstroke in areas where the temperature can dip to minus 20 F. Trucks in climates with milder winters may be better off with up to 15W-40.
What is the best oil to run in a 6.4 Powerstroke?
Stay with a good quality conventional oil (Shell Rotella, Chevron Delo 400, or Motorcraft) and change it every 3,000 to 4,000 miles and you’ll never have a problem.
