Oil Capacity for a 2017 Chevy SS
The 2017 Chevy SS takes approximately 8 quarts of oil for an oil change, as confirmed by a response from a Chevy SS owner on a forum dedicated to Chevy SS owners and enthusiasts.
It’s important to use the correct type and amount of oil to avoid premature wear on the engine. The Chevy SS requires the use of synthetic motor oil to keep the vehicle protected in any driving condition.
Contents
- What oil does a Chevy SS take?
- What kind of oil does a 2017 Chevy 6.2 take?
- What oil does a 6.2 Chevy take?
- What oil does a 2017 Chevy SS take?
- How much horsepower does a 2017 SS have?
- What oil does a 6.2L V8 take?
- How much oil does a 6.2 liter engine take?
- How many quarts of oil does a Chevy SS take?
- How much oil does a 2017 Chevy 6.2 take?
- What oil does a 6.2 L V8 take?
What oil does a Chevy SS take?
Oil Grade: SEOC3
Viscosity: | All TEMPS….5W-30 Below -20 F .0W-30 |
---|---|
Capacity: | With filter 8 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…18 ft/lbs |
Notes: | (1) GM Dexos 1 Gen 2 has been discontinued and replaced by GM Dexos 1 Gen 3. |
What kind of oil does a 2017 Chevy 6.2 take?
Best Oil to Use for the 2017 Chevrolet Silverado
If you go with either the 5.3L or 6.2L V8, you will need to use SAE 0W-20 for every oil change. Also use this oil if you need to top off the oil between changes. If you get this truck with either the 4.3L V6 or 6.0L V8, then SAE 5W-30 will serve as your oil of choice.
What oil does a 6.2 Chevy take?
In general, the top Chevy Silverado 1500 oil type is SAE 0W-20 full synthetic motor oil from ACDelco’s dexos1 standard for the 5.3L and 6.2L engines.
What oil does a 2017 Chevy SS take?
Notes: OE Recommendation, Full Synthetic. 5W-30.
How much horsepower does a 2017 SS have?
415 hp2017 Chevrolet SS / Horsepower
What engine comes in a 2017 Chevy SS? The 2017 Chevy SS is equipped with a 6.2L V8 that generates 415 hp and 415 lb-ft of torque.
What oil does a 6.2L V8 take?
SAE 0W-20
6.2-Liter V8 Engine
It will require SAE 0W-20 viscosity grade engine oil.
How much oil does a 6.2 liter engine take?
Capacities and Specifications – 6.2L
Item | Capacity |
---|---|
Engine oil (with oil filter). | 7.0 qt (6.6 L) |
Engine coolant. | 21.3 qt (20.2 L) |
Brake fluid. | Between MIN and MAX on brake fluid reservoir |
Front axle. | 2.7 qt (2.6 L) |
How many quarts of oil does a Chevy SS take?
8.0
Capacities
EPA passenger volume (cu ft / L): | 106.9 / 3027 |
---|---|
Cargo volume (cu ft / L): | 16.4 / 464 |
Fuel tank (gal / L): | 18.8 / 71.2 |
Engine oil (qt / L): | 8.0 / 7.6 |
Cooling system (qt / L): | 11.6 / 11 |
How much oil does a 2017 Chevy 6.2 take?
8 quarts
Capacity: With filter 8 quarts. After refill check oil level.
What oil does a 6.2 L V8 take?
SAE 0W-20
6.2-Liter V8 Engine
It will require SAE 0W-20 viscosity grade engine oil.