AHG Auto Service » Make » Dodge » How much is a 440 Dodge worth?

How much is a 440 Dodge worth?

Dodge 440 Engine Value
The value of a Dodge 440 engine can vary based on several factors such as its condition, whether it’s from an RV or a regular vehicle, and the specific accessories it comes with. Here’s a summary of the information from the search results:
– The value of a 440 engine can range from as low as $100 as a core to as much as $1,000 for a verifiable good runner. Industrial motors with low mileage and running excellently have been picked up for under $150 on several occasions.
– A running engine with a specific block code, casting, and accessories was being considered for a 1967 R/T builder car and was described as tired but not using oil. The owner was seeking opinions on its worth, indicating that it might be available for purchase.
– On eBay, Mopar 440 engines are listed for sale, with a variety of brand enhancements available. The Mopar version is used for muscle cars and trucks, and the engines are known for their big V8 block.
– The engines listed on eBay are available at affordable prices, and the site offers a large online selection of Mopar engines for the 440.
– A forum post mentioned purchasing three complete 440 engines, one complete 440 short block, and 13 sets of big block Mopar heads, along with other parts, for $775. It also mentioned regular 440 engines going for $100 as a core to $1,000 for a verifiable good runner.
– Another forum post indicated that a 440 engine from a ’78 Dodge Powerwagon, when parting out, might be worth a few hundred dollars for the block, with the rest being valuable as a replacement motor for another truck. The post also mentioned specific part numbers and features of the engine.
– A story was shared about finding a 440 engine in a low-mileage Winnebago motorhome and purchasing the engine and transmission for $400. The engine was equipped with a factory forged crankshaft and had very little wear, making it suitable for use as a dyno mule to test some parts.
– A long-time muscle car enthusiast expressed the opinion that a low mileage, all original 440 engine could be very desirable to someone restoring a vintage car to original condition, potentially fetching a significant value, with rebuilt engines being found for as much as $10,000 on eBay and other sites.
– A post on a Mopar forum mentioned paying $800 for a running, driving ’69 440 with performance intake, headers, and a cam, and seeing a ’67 440 listed for $600 after two months on a local classifieds site. The post also mentioned the value of 440-powered vehicles and the variability in prices based on the year and included parts.
Based on the information from the search results, the value of a Dodge 440 engine can vary widely, from as low as $100 for a core to potentially several thousand dollars for a low mileage, all original engine with specific desirable features. The specific value of a 440 engine would depend on its condition, any included accessories, and the demand in the market.

Is Mopar 383 and 440 same block?

The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.

What’s the difference between a 383 and a 440?

The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.

Which is better 440 or Hemi?

The 426 Hemi was better than a 440 six pack because it had more horsepower and faster 1/4 mile and 0–60 times. The 426 Hemi had 425 horsepower at 5,000 rpm while the 440 six pack had 390 horsepower at 4,700 rpm.

Will 426 Hemi heads fit on a 440 block?

Max agreed that the 426 heads will not fit the 440 block without necessary component upgrades, and a company called SVE (Stage V Engineering) makes the kit you will need. But Max emphasized that the layman answer is no, the Hemi heads will not fit a stock 440 block. (See www.stageV.com for more).

Is a 440 a good engine?

The 440 big block Mopar engine is a legend in the automotive world. It is a powerful, reliable, and tunable engine that has been used in a wide variety of vehicles. If you are looking for an engine that can provide you with years of enjoyment, the 440 big block Mopar engine is a great option.

How much power can a stock 440 handle?

Although the most powerful factory stock 440 engines produced a rated 390 gross horsepower, the OEM blocks can take power in the 600hp range, and survive practically indefinitely at the 500-550hp level. Mopar built quite a bit of strength into the bottom end of these engines.

What’s the difference between a Dodge 440 and a 440 Magnum?

I think the only difference between a standard 440 and magnum is the camshaft and compression,the blocks are all the same. U.S.S.A. U.S.S.A. Higher compression will also depend on the year , 66-70 the 350HP and 375HP motors had the same advertised compression ratio.

What year did Dodge make the 440 engine?

The 440 first appeared in 1966, and before long it was available in both full-size sedans and coupes as well as the intermediate muscle machines that were entering their glory years.

Was the 440 faster than the 426 Hemi?

The 426 Hemi was better than a 440 six pack because it had more horsepower and faster 1/4 mile and 0–60 times. The 426 Hemi had 425 horsepower at 5,000 rpm while the 440 six pack had 390 horsepower at 4,700 rpm.

How much HP does a stock 440 Mopar have?

375 horsepower
And while the Mopar 440 does several things very well, we’ve always felt that with a few tweaks the engine was capable of well over the 375 horsepower rating it got from the factory.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment