Ford Crown Victoria Police Interceptor Horsepower
The Ford Crown Victoria Police Interceptor was equipped with a single-overhead-cam, 4.6-liter V-8 engine that produced 250 horsepower at 5,000 rpm. This boost in power was due chiefly to a specific police car air induction system, which helped the engine breathe more efficiently. The engine also generated 297 foot-pounds of torque at 4,000 rpm. The top speed of the 2011 model year is around 140 mph.
In summary, the Ford Crown Victoria Police Interceptor had a horsepower rating of 250 horsepower.
If you need further information or have any other questions, feel free to ask!
Contents
- How much horsepower does a 07 Crown Vic Police Interceptor have?
- Are police Crown Vics reliable?
- How fast can a police Crown Vic go?
- What was the worst year for the Crown Victoria?
- What’s the difference between a P71 and a P7B?
- How much HP did police Crown Vic have?
- Are police crown vics fast?
- What is the P71 police package?
- How much horsepower does a 4.6 Police Interceptor have?
- What is the difference between Crown Vic and Police Interceptor engine?
How much horsepower does a 07 Crown Vic Police Interceptor have?
Under the hood is the 4.6-liter, 224-horsepower V-8. Feel free to go looking for one of those high-powered Crown Victoria Police Interceptor models, but they only have 239 horsepower, 11 fewer than a Kia minivan.
Are police Crown Vics reliable?
Safety – Its heavy-duty body-on-frame platform kept the vehicle intact in the event of collisions. Reliability – The operating lifespan of a properly-maintained Crown Victoria easily exceeded 200,000 miles.
How fast can a police Crown Vic go?
Aside from the traditional upgraded suspensions, coolants, alternators, etc., their transmissions are tuned to shift a bit quicker and their top speed is not as limited by the governor, which they usually go up to 129 mph. In comparison, the regular Crown Victoria only reaches 110.
What was the worst year for the Crown Victoria?
The worst year for Crown Victoria in terms of reliability was arguably 2008. This model year was marked by a number of common problems that plagued owners, including transmission troubles, blown head gaskets, and failures of the fuel pump.
What’s the difference between a P71 and a P7B?
“Until recently, I also had a 2007 Crown Victoria P71, the P71 being the serial number for the Ford police package. Apparently they ran out of VINs so adopted the P7B number for later cars.
How much HP did police Crown Vic have?
The cars were in demand by taxi companies and others who wanted a safe, durable, and/or inexpensive car, and those who needed a car with a large back seat. The CVPI came equipped with many heavy-duty parts, such as a revised transmission, and a 186 kW (253 PS; 249 hp) engine.
Are police crown vics fast?
Top Speed: 129 MPH
The 2011 Ford Crown Vic, as it is so commonly called, may have looked fast, and even though it had an engine that could very well go up into the mid to high three digits, it was, for some reason, limited to 129 MPH.
What is the P71 police package?
The Crown Victoria Police Interceptor (often referred to simply as CVPI or P71) is the law enforcement version of the Ford Crown Victoria. It is one of the most widely used automobiles in law enforcement departments of the United States and Canada.
How much horsepower does a 4.6 Police Interceptor have?
The Police Interceptor uses a 4.6L SOHC V-8 with 235 HP. For the first time in a decade, Ford Fleet acknowledged it was seriously considering a new police engine. Ford has steadily increased power from its 4.6 SOHC engine since its 1992 introduction.
What is the difference between Crown Vic and Police Interceptor engine?
In this category, the Police Interceptor boasts a more powerful engine than the standard Crown Victoria. The police version typically has a 4.6L V8 engine with enhanced performance characteristics like an improved intake manifold, a more aggressive engine control module, and a dual exhaust system.
