Horsepower of 1993 Chevrolet S-10 4.3 Liter V-6 Engine
The 1993 Chevrolet S-10 with a 4.3 liter V-6 engine had 175 horsepower when equipped with 2WD and 180 horsepower when equipped with 4WD.
So, the 1993 Chevrolet S-10 4.3 liter V-6 engine had either 175 or 180 horsepower, depending on whether it was equipped with 2WD or 4WD.
Contents
- How much horsepower can a Chevy 4.3 make?
- Is the 4.3 V6 a good engine?
- How much can a 1993 Chevy S10 tow?
- How much HP does a v6 4.3 Vortec make in a 99 S10 Extreme?
- What engine is in a 1993 S10 Blazer?
- How to add horsepower to a 4.3 V6?
- How many gallons of gas does a 1993 s10 hold?
- How fast is a 4.3 S10?
- How much can a S-10 pull?
- What is the fastest production S-10?
How much horsepower can a Chevy 4.3 make?
The 4.3 Baby LT is somewhere in the neighborhood of 250 HP. Chevrolet literature claimed the goal was 1HP / cube and they say it was acheived. that would make it 260HP.
Is the 4.3 V6 a good engine?
The Chevrolet 4.3 V6 is one of General Motors’ most fuel-efficient engines as this engine has been servicing the clients for a long time. Although this is a long lasting and powerful engine, it does have certain flaws. The Chevy 4.3 V6 engine is extremely dependable, with a life expectancy of over 300,000 miles.
How much can a 1993 Chevy S10 tow?
Used 1993 Chevrolet S-10 – Specs & Features
| Towing & Hauling | |
|---|---|
| Max Towing Capacity | 6,000 lbs. |
| Max Payload Capacity | 1,176.0 lbs. |
How much HP does a v6 4.3 Vortec make in a 99 S10 Extreme?
The optional engine is 4.3-liter V-6 that produces 180 horsepower (190 horsepower in four-wheel-drive models) at 4,400 rpm and 245 pound-feet of torque (250 pound-feet in 4x4s) at 2,800 rpm. Mileage: In the test truck, about 16 miles per gallon in mostly city driving. Estimated 292-mile range.
What engine is in a 1993 S10 Blazer?
4.3 L V61993 Chevrolet S10 Blazer / Engine
A 5-speed manual transmission remained standard through 1994, but only with the TBI engine. Only the two 4.3 L (262 cu in) engines were offered as options – the base TBI and the CPI (introduced in 1992 for the S-series and Chevrolet Astro minivans; the latter had the “Vortec” logo on the intake plenum).
How to add horsepower to a 4.3 V6?
V6 is no different than any other engine, you rise compression ratio or install a turbo or supercharger, change better heads, better camshaft, better intake and exhaust manifolds and exhaust pipes, bigger throttle body/ carburetor.
How many gallons of gas does a 1993 s10 hold?
1993 Chevrolet S10 Blazer Specs, Features & Options
| Curb Weight | |
|---|---|
| 191.8 cubic feet | 206.7 cubic feet |
| Fuel Capacity | |
| 20 gallons | 20 gallons |
| Front Head Room |
How fast is a 4.3 S10?
Performance
| 0 – 60 mph | 9.0 s |
|---|---|
| 0 – 100 mph | 37.8 s |
| 1/4 mile | 17.2 s @ 78.0 mph |
| Lateral acceleration | 0.63 g (6 m/s²) |
| 70 mph – 0 | 65 m (213 ft) |
How much can a S-10 pull?
Manual says truck is capable of towing 5800 lbs. Friends of mine say it will not. I have found a few trailers with dry weight of 3000 lbs. and a load range of 1000 lbs.
What is the fastest production S-10?
1991 GMC Syclone
S10 Truck. 1991 GMC Syclone – fastest production truck ever made.
