1973 Dodge Charger 400 Magnum Horsepower
The 1973 Dodge Charger 400 Magnum had varying horsepower ratings based on the type of carburetor it was equipped with. The standard two-barrel version produced 185 horsepower at 3,600 rpm, while the high-performance four-barrel version produced 260 horsepower at 4,800 rpm. Therefore, the 1973 Dodge Charger 400 Magnum had a horsepower range of 185 to 260 depending on the specific engine configuration.
If you have any more questions or need further assistance, feel free to ask!
Contents
- How much horsepower does a 1972 440 Magnum have?
- What is a 400 block engine?
- How much horsepower does a 1973 Dodge 440 have?
- How much horsepower does a 400 big block have?
- How much horsepower does a 440 Magnum have?
- What engine came in a 1973 Charger?
- Is a 400 small block a V8?
- How much horsepower does a 73 Charger have?
- Is a 1973 Dodge Charger a good car?
- How much did a Dodge Charger cost in 1973?
How much horsepower does a 1972 440 Magnum have?
But the 440 Magnum was still one of the industry’s top power producers, rated 280 net horsepower at 4,800 RPM and 375 lb.
What is a 400 block engine?
The 400 small block was a light duty expanded version of the 350 that I wouldn’t even consider buying. The bores were so big that they had to siamese the cylinders together on the outside. The stroke was too long to fit inside that block properly. The workaround was to use a rod that was too short to work well.
How much horsepower does a 1973 Dodge 440 have?
Still available in 1973, the big 440 engine was rated 275 horsepower at 4,800 rpm and 380 lb-ft of torque at 3,200 rpm. Changed for ’73 was the four-barrel carb.
How much horsepower does a 400 big block have?
The 400 V8: Final Mopar Big Block Engine
| 1974 horsepower | 400 | 440 |
|---|---|---|
| 2-barrel | 185 @ 4,000 | |
| 4-barrel HP | 250 @ 4,800 | 275 @ 4,400 |
| Police | 240 @ 4,800 | 275 @ 4,400 |
How much horsepower does a 440 Magnum have?
375 HP
440 Magnum | engine | Mark goes over the 375 HP 440 Magnum with a 4 Barrel engine.
What engine came in a 1973 Charger?
Under the hood, the 1973 Chargers carried a base 225-cid slant six or the 150-hp 318 V-8. The 400 was optional in both two- and four-barrel varieties. Above that was the 280-hp 440. The Chargers got a new Torsion-Quiet Ride suspension setup for the model year, and disc brakes were standard on the front.
Is a 400 small block a V8?
The Biggest Small-Block So Far: The 400-Cubic-Inch V-8. The largest version of the Generation I small-block was the 400 (6.6 liter) . It was the only engine available with both the 4.125-inch bore and the 3.75-inch-stroke crankshaft. It debuted in 1970 and was produced for 10 years.
How much horsepower does a 73 Charger have?
Specifications for Dodge Charger Hardtop 5.2 V8 Manual, 152hp, 1973.
Is a 1973 Dodge Charger a good car?
The uprated brakes are better than I was expecting, performance too was lusty and torquey (despite having what was the best – non-HEMI- 318 5.2-litre moter), and overall this is fine cruiser.
How much did a Dodge Charger cost in 1973?
A total of 119,318 Chargers were built during the 1973 model year – 45,415 hardtop coupes like the one Meier ordered. The Charger that Meier ordered in February 1973 had a base price of $3,132. By the time the cost of the desired options were added the price of the Dodge had climbed to $4,687.45.
