How much engine oil required for Honda City petrol?

Engine Oil Requirement for Honda City Petrol
For a Honda City petrol engine, the engine oil requirement can vary based on the specific model and year of the car. However, for the 2017-2020 Honda City with a 1.5-litre, SOHC, i-VTEC engine, semi-synthetic engine oil 5W40 is recommended as the best suited engine oil.
Honda provides specific part numbers for its genuine engine oils. For the 1.5-litre petrol engine, the recommended Honda Genuine Oil part numbers are as follows:
– 1 Litre Bottle: 08232-P99S-1LHE
– 4 Litre Bottle: 08232-P99S-4LHE
– 205 Litre Barrel: Not available.
It’s important to note that the engine oil requirement may also depend on factors such as driving habits, climate, and road conditions encountered. Additionally, the choice between synthetic and non-synthetic oil can also impact the amount of oil required and the overall performance of the engine.
Therefore, it’s advisable to consult the Honda Application Chart for the specific model and year of the Honda City to ensure the optimal engine oil is selected for the car.

How many liters of engine oil is needed?

Generally, most engines require between 4 and 6 litres of oil. However, it is important to check your owner’s manual or the manufacturer’s website to determine the exact amount of oil your engine requires. It is also important to note that the type of oil you use can affect the amount of oil your engine needs.

How much oil does a 1.5 liter engine take?

Generally an 1.5 litre engine will hold about 4 liters of oil, but however you may get this done at the TOYOTA service who will fill the actual grade and quantity with original oil filter for trouble free performance. Use your discretion.

Can I use 5W30 instead of 0w20 Honda?

The Mobil 1 5w30 should work fine in your engine. However, unless you’re doing extended drains (7500 to 10,000 miles), you’d be just as well off running a good conventional 5w20 (for 3000 to 6000 mile OCIs).

What kind of oil does a Honda petrol engine take?

Mobil 1 0W-20 for Honda
Mobil 1 0W-20 is a fully synthetic engine oil suitable for a number of Honda car models. Mobil 1 0W-20 meets or exceeds the requirements of API SN, API SM, API SL and ILSAC GF-5.

How much oil does a Honda City 1.5 take?

A. 3.2 litres of Engine Oil is required for Honda City. It is equipped with an engine with specifications like 119.35bhp@6600rpm power, 145 Nm @ 4300 rpm torque, 1498 cc engine capacity and 4 cylinders.

How much oil does a 4 cylinder Honda engine take?

Oil Grade: API*

Viscosity:	All TEMPS….0W-20
Capacity:	Without filter 4 quarts. After refill check oil level.
Capacity:	With filter 4.2 quarts. After refill check oil level.
Torque:	Oil Drain Plug…29 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug.

How much oil does a 1.5 Honda Fit take?

3.5 quartsOil Grade: API*

Viscosity:	0W-16, 0W-20 (All TEMPS)
Capacity:	3.5 quarts (with filter). After refill check oil level.
Capacity:	3.3 quarts. w/of. After refill check oil level.
Torque:	30 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug.

How much engine oil is required in Honda City?

Engine Oil

Recommended	Genuine Honda Motor Oil API service SM or higher grade 0W-20, 0W-30, 5W-30, 10W-30
Capacity	Change	3.0 L
Change including filter	3.2 L

How many Litres of oil does a Honda take?

Senior Member. The 1.5t engine calls for 3.7 quarts or 3.5 liters when doing an oil and filter change.

Which engine oil is best for Honda City ZX petrol?

For instance, the 1.5-liter i-VTEC petrol engine in the Honda City typically calls for engine oil with a viscosity grade of 5W-30 or 10W-30. This choice of oil is tailored to the engine’s specific requirements, ensuring proper lubrication and protection under various operating conditions.