AHG Auto Service » Make » Ford » How much drain and fill capacity does a Ford 10r80 have?

How much drain and fill capacity does a Ford 10r80 have?

The Ford 10R80 transmission has a fluid capacity of 13 quarts.

How much fluid does a 10R80 transmission take?

around 5 quarts
Note: Basic drain and refill takes around 5 quarts. Each system is different and may need more or less fluid. NOTE: This kit will NOT work with 6R80 transmission. Please confirm your transmission before purchase.

What fluid goes in a 10R80?

Mercon ULV Transmission Fluid
The 10R80 Service Kit includes 13 quarts of Mercon ULV Transmission Fluid and a Transmission Filter. Routine transmission maintenance should include fluid change, as well as a new filter, every 30,000 miles.

How much transmission fluid does a 10R80 hold?

According to the Ford manual, total fluid capacity for this unit is 12.7 quarts (12L) of Mercon ULV.

How much oil does a 10R80 Mustang take?

Capacity: 10 speed 10R80 Total Fill 12.7 quarts.

Can you just drain and fill transmission fluid?

Sometimes referred to as a fluid change, a drain and fill is when the transmission pan gets lowered and drained. The filter is replaced, if necessary, and the pan is reinstalled. Finally, the car is refilled with fresh transmission fluid.

How many quarts of transmission fluid does a Ford transmission hold?

Transmission Fluid Capacity
Transmission (w/ Stock Pan) # of Quarts
Ford C4 5.5
Ford C6 7
Ford AOD/AODE 6.5

Is a transmission drain and refill the same as a flush?

With a flush, all the old fluid is removed by a flush machine and replaced with new fluid, allowing for optimal transmission performance. A fluid change is a drain-and-refill, with some old fluid remains in the transmission after the change, which can contaminate the new fluid — and diminish performance.

How much transmission fluid does a 17 f150 hold?

Automatic Transmission Fluid
Capacity: 6 speed 6R80 Total Fill 13.1 quarts. Capacity: 3.5 quarts Initial Fill.

How much transmission fluid does a 2018 Ford Raptor hold?

For Automatic Transmission: 10R80….ULV
Capacity: 10 speed 10R80 Total Fill 13.1 quarts.

How much transmission fluid do I need for a drain and fill?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment