How much does it cost to replace a vacuum pump on a Ford F150?

Cost to Replace a Vacuum Pump on a Ford F150
When it comes to replacing a vacuum pump on a Ford F150, the cost can vary based on several factors such as the model of the car, the type of pump, and your location’s labor fees. On average, the cost to replace a vacuum pump on a Ford F150 can range from $500 to $900.
The vacuum pump on a Ford F150 is usually located behind the engine, mounted near the firewall and close to the master cylinder and brake booster. It is an electric air pump that maintains a constant amount of vacuum in the vacuum reservoir behind the front bumper. If the vacuum pump fails, it can lead to improper brake operation, making vehicle operation unsafe. Therefore, it’s important to have the vacuum pump replaced immediately if it is diagnosed as faulty.
The cost of the replacement may also depend on the specific year and engine type of the Ford F150. For example, the cost for a Ford F-150 Brake Vacuum Pump Replacement can vary based on the model year and engine type. On average, the cost for a Ford F-150 Brake Vacuum Pump Replacement is $204 with $71 for parts and $133 for labor. However, specific estimates for different model years and engine types are also available.
It’s important to note that the actual cost of replacing the vacuum pump on a Ford F150 may vary depending on the specific circumstances and the location where the service is performed. Therefore, it’s recommended to obtain a fair price estimate from a certified mechanic or service center in your area for an accurate cost assessment.
In summary, the cost to replace a vacuum pump on a Ford F150 can range from $500 to $900 on average, but it’s advisable to obtain a specific estimate based on the model year, engine type, and location.

What is the diagnostic code P258B?

OBD Code P258B – Vacuum Pump Control Range/Performance
Is the brake pedal not responding properly? Do you hear weird sounds from under the car due to vacuum leaks? These symptoms can indicate towards problematic vacuum pump control causing OBD code P258B getting stored in the PCM (Powertrain Control Module).

How much does it cost to replace a water pump in a Ford F150?

between $702 and $779
The average cost for a Ford F-150 Water Pump Replacement is between $702 and $779. Labor costs are estimated between $170 and $214 while parts are priced between $532 and $564.

How much does it cost to repair a vacuum pump leak?

Depending on where the leak is in your vacuum system, repair costs range from $150 to $1,000. Specifically, it depends on various conditions and, most importantly, where the leaks occur. If you’ll have to replace the intake gasket, the item cost is a mere $30 to $50, with labor costing between $200 to $300.

What does code P258B mean?

“5” in the third character position in a DTC indicates that the vehicle speed, idle control and auxiliary inputs is experiencing a malfunction. The last two characters “8B” is DTC number. OBD2 Diagnostic Trouble Code P258B means that Vacuum Pump Control Circuit ‘A’ Range/Performance has been detected.

What is the code P258B on a Ford F150?

What does OBD-II fault code P258B mean? Diesel vehicles have a separate vacuum pump an reservoir because they cannot utilize vacuum from the engine the way a gasoline vehicles can. The engine control module (PCM) tells the vacuum pump when to turn on an off. If the PCM cannot control the pump, it will set code P258B.

What is the purpose of the vacuum pump on a Ford F150?

A vacuum pump is a device that helps high performance engines by adding a bit of extra horsepower. As added benefits, the vacuum pump helps to keep oil cleaner, thus extending the life of your engine. Specifically, the Ford F150 Ecoboost vacuum pump helps the brakes work better.

Is it OK to drive with a vacuum leak?

In most cases, a vacuum leak won’t prevent you from driving your car. But you should address the issue as soon as possible, as it can lead to a lean misfire that can potentially damage other parts of the vehicle.

What happens when vacuum pump fails?

When a pump starts to malfunction, less suction is produced, which increases the pressure inside the brake lines and helps to give pressure to the brake master cylinder. The insufficient pressure in the brake system eventually reaches the pedal. The pedal will be firm under heavy pressure but quite forgiving.

What happens if you have a bad vacuum pump?

The vacuum pump generates a vacuum, which is the removal of atmospheric pressure from a closed space. Symptoms of a bad vacuum pump include hissing noises from vacuum leaks, a rough brake pedal, and oil leaks on the engine’s left or right side. A replacement vacuum pump can cost anywhere between $35 and $310.

What are the symptoms of a bad vacuum pump?

The vacuum pump generates a vacuum, which is the removal of atmospheric pressure from a closed space. Symptoms of a bad vacuum pump include hissing noises from vacuum leaks, a rough brake pedal, and oil leaks on the engine’s left or right side. A replacement vacuum pump can cost anywhere between $35 and $310.