How much does it cost to replace a tie rod on a 2010 Ford Fusion?

Cost to Replace a Tie Rod on a 2010 Ford Fusion
When it comes to the cost of replacing a tie rod on a 2010 Ford Fusion, the price can vary based on several factors such as the type of tie rod, labor costs, and whether aftermarket or factory parts are used.
Average Cost:
– The average cost for a Ford Fusion tie rod replacement is between $143 and $155.
– With a factory part, the total cost is $375, and with an aftermarket part, it is $319.
– The tie rod replacement cost can range from $185 to $305 in total, with the new tie rod part costing about $40 to $120 and labor costing around $145 to $185.
– Expect to spend between $100 and $400 for a tie rod replacement.
– A tie rod replacement on a mainstream vehicle like the Ford Fusion should cost between $400 and $750, including an alignment.
Inner vs. Outer Tie Rod:
– Replacing the inner tie rod end is more expensive than the outer tie rod end since it requires special tools and more effort.
– The labor time for an inner tie rod replacement on a 2010 Ford Fusion is around 3.1 hours, with a total cost of around $512 using a factory part or $493 using an aftermarket part.
– Replacing an outer tie rod end of the 2010 Ford Fusion takes about 0.4 hours, with a total cost of about $130 using a factory part or about $92 using an aftermarket part.
In summary, the cost of replacing a tie rod on a 2010 Ford Fusion can range from $100 to $750, depending on various factors such as the type of tie rod, labor costs, and the choice between aftermarket and factory parts.

What noise does a bad tie rod end make?

When your tie rods go bad, the symptom you’re most likely to experience first is a vibration or shaking sensation in your steering wheel. You may also hear associated clunking and rattling noises, especially when turning the vehicle at low speeds. These sounds are caused by tie rods that are starting to wear out.

How much should a tie rod replacement cost?

The cost of replacing a tie rod depends on the type of vehicle, the parts’ scarcity, and the quality. The average cost ranges from $100 to $400. However, expect to pay more for luxury and high-end vehicles. It would be best if you always replaced tie rods in pairs.

What are the symptoms of a bad tie rod?

Common signs include a steering wheel that shakes or vibrates and looseness or excessive play in the steering wheel. The vibration typically becomes worse as you accelerate or turn. Don’t wait for your steering issues to become worse; get your vehicle to a qualified technician as soon as you notice these issues.

Can a bad tie rod affect brakes?

Yes it can. A bad tie rod has excessive play within it and that can allow the wheel to oscillate back and forth. That causes vibration when you hit a bump or apply the brakes. However, a bad tie rod is not the only thing that can cause vibration while braking.

Can I drive with a bad tie rod?

In the worst case scenario when a tie rod completely fails, the wheel will break free of the steering assembly which then causes the vehicle to lose the ability to steer. At the first sign of any wear to the tie rods, steering is already at risk and the vehicle is not safe to drive.

How many hours does it take to replace tie rods?

As with many other vehicle repair questions, the answer is – it depends. The price of tie rods, parts and labor can vary from vehicle to vehicle. The average car can probably get a tie rod replaced in about an hour labor plus about $80 for the part, so about $170.

How much does it cost to replace a tie rod end on a Ford Fusion?

The average cost for a Ford Fusion Tie Rod Replacement is between $142 and $154. Labor costs are estimated between $46 and $58 while parts are typically priced around $96. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How do you move a car with a broken tie rod?

It’s impossible, you cannot drive a car with a broken tie rod. The tie rod ties the two front wheels together so that they steer in the same direction. A broken tie rod would allow one of the two front wheels to go wherever it wants to. You would not be able to steer at al with a broken tie rod.

Is it OK to replace just one tie rod?

Ideally, YES – if the concern is excessive wear. However, sometimes a ball joint which might be otherwise in good condition (that is, not worn) can be damaged as a result of an accident or impact. If the damage does not affect both tie rod ends, you can usually replace just one. Though a thorough inspection is advised.

Are tie rods easy to fix?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.