How much does it cost to replace a tie rod end on a Ford Fusion?

Cost to Replace a Tie Rod End on a Ford Fusion
If you need to replace a tie rod end on your Ford Fusion, the cost can vary depending on several factors, including the type of tie rod, labor costs, and any additional repairs needed. Here are some key points to consider:
– The cost of replacing a tie rod end on a Ford Fusion typically ranges from $143 to $305 in total, including the cost of the part and labor.
– The price of the tie rod end itself can range from about $40 to $120.
– Labor costs for the replacement can range from around $145 to $185.
– The cost may be higher if the front wheel alignment needs to be adjusted, adding an additional $80 to $100 to the total bill.
– It’s worth noting that the inner tie rod end replacement is generally more expensive than the outer tie rod end replacement, as it requires special tools and more effort.
– However, you don’t always need to replace both tie rod ends together.
It’s important to keep in mind that these cost estimates can vary depending on the specific vehicle and location. It’s recommended to consult with a trusted mechanic or repair shop for a more accurate estimate based on your situation.
Note: Always consult with a professional mechanic or repair shop for an accurate cost estimate and to ensure the proper replacement of the tie rod end on your Ford Fusion.

What are the symptoms of a bad tie rod?

Common signs include a steering wheel that shakes or vibrates and looseness or excessive play in the steering wheel. The vibration typically becomes worse as you accelerate or turn. Don’t wait for your steering issues to become worse; get your vehicle to a qualified technician as soon as you notice these issues.

Is it OK to drive with a bad tie rod end?

In the worst case scenario when a tie rod completely fails, the wheel will break free of the steering assembly which then causes the vehicle to lose the ability to steer. At the first sign of any wear to the tie rods, steering is already at risk and the vehicle is not safe to drive.

How many hours does it take to replace tie rods?

As with many other vehicle repair questions, the answer is – it depends. The price of tie rods, parts and labor can vary from vehicle to vehicle. The average car can probably get a tie rod replaced in about an hour labor plus about $80 for the part, so about $170.

What is the life expectancy of a tie rod?

How long do tie rods last? Tie rods can last for several years. In fact, you may never have to replace your tie rods. The conditions you drive in play a large role in the lifespan of tie rods.

Is it OK to replace just one tie rod?

Ideally, YES – if the concern is excessive wear. However, sometimes a ball joint which might be otherwise in good condition (that is, not worn) can be damaged as a result of an accident or impact. If the damage does not affect both tie rod ends, you can usually replace just one. Though a thorough inspection is advised.

How much should a tie rod replacement cost?

The cost of replacing a tie rod depends on the type of vehicle, the parts’ scarcity, and the quality. The average cost ranges from $100 to $400. However, expect to pay more for luxury and high-end vehicles. It would be best if you always replaced tie rods in pairs.

Do I need an alignment after replacing tie rods?

If you have rack and pinion-type inner and outer tie rods, you can often remove and replace them without upsetting the vehicle’s alignment specs. However, you will need to have an alignment done after replacing the outer tie rods. You should still try to keep the alignment specs in line as much as possible.

Do you need an alignment after replacing tie rods?

If you have rack and pinion-type inner and outer tie rods, you can often remove and replace them without upsetting the vehicle’s alignment specs. However, you will need to have an alignment done after replacing the outer tie rods.

Are tie rods easy to replace?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.

Are tie rods easy to fix?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.