AHG Auto Service » Make » Honda » How much CVT fluid for a 2010 Honda Insight?

How much CVT fluid for a 2010 Honda Insight?

Based on the search results, the 2010 Honda Insight requires approximately 2.8 liters of CVT fluid for a simple replacement and 4 liters if you are replacing the 2 filters as well. If you are doing a complete replacement with dismantling the CVT, it would require 5.2 liters of CVT fluid.
Please note that it is always recommended to consult the owner’s manual or contact a certified Honda dealership for the most accurate and up-to-date information regarding fluid specifications and capacities for your specific vehicle.

How much CVT transmission fluid do I need?

If you are just going to drain and refill the cvt, then you’ll need 4 or 5 litres maximum. The cvt holds more, but you’re not going to be able to empty it completely. If you want to do 3 separate drain & fills then this would use 8+ quarts, it’s a very thorough way to clean up the cvt.

Is it bad to overfill CVT transmission fluid?

Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water.

How much transmission fluid does a Honda need?

when adding or changing fluid. After checking the fluid level, replace the dipstick securely. AUTOMATIC TRANSMISSION FLUID CHANGE CAPACITY: 2.4 (2.1 Imp qt, 2.5 US qt). The engine in your Honda contains a number of aluminum parts.

What fluid does Honda CVT transmission take?

Honda HCF-2 Transmission Fluid
Honda HCF-2 Transmission Fluid, the second generation of Honda CVT fluid, is used specifically in Honda vehicles with second generation Continuously Variable Transmissions (CVT).

How many quarts of transmission fluid does a CVT take?

4 would be average. The first drain/fill on our 2019 Sentra was around 3.5 quarts, the second was 4.5.

How many quarts does a Honda CVT transmission take?

If you removed the fill plug, emptying of about 4qts will take just 3-5 minutes at most. If not, it will take significantly longer. Once oil stops coming out, *wipe the bolt magnet clean*, replace crush washer and install bolt & washer. Using long-neck funnel, refill with all 4qts of CVT oil.

How much oil does a CVT transmission take?

NOTE: Capacity used for the transmission is 4.2 Quarts.

How much transmission fluid do I need?

How much transmission fluid your vehicle needs ranges from as few as 8-9 quarts for small passenger vehicles to more than 20 quarts for heavy-duty trucks. As you do when determining how often to change transmission fluid, check your owner’s manual for the transmission fluid capacity.

How often should Honda CVT transmission fluid be changed?

every 25,000 miles
Vehicles that regularly participate in this type of driving require more frequent transmission fluid changes. Replace your CVT fluid every 25,000 miles.

How often do you change the transmission fluid in a Honda CVT?

every 50,000 to 100,000 miles
How Often Should You Get a Honda Transmission Fluid Change? It is recommended that you schedule a Honda transmission fluid change every 50,000 to 100,000 miles. The interval will change depending on the model you drive and the type of transmission it is equipped with.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment