AHG Auto Service » Make » Ford » How much coolant does a Ford Flex need?

How much coolant does a Ford Flex need?

Amount of Coolant for Ford Flex
Based on the information from the Ford Flex Forum, the coolant capacity for a Ford Flex varies depending on the engine type. The manual specifies the following capacities:
– Engine coolant (with rear heater): 13.2 quarts (12.5L) for the 3.5L engine.
– 3.5L EcoBoost engine coolant capacity: 13.7 quarts (13.0L).
It’s important to note that the specific amount needed should always be checked in the owner’s manual for the particular model and year of the Ford Flex. This will ensure the correct quantity is used for the vehicle’s cooling system.
If you have any further questions about the type of coolant or the intervals for coolant changes, it’s recommended to refer to the owner’s manual or consult a certified service technician for accurate information.

What color coolant does Ford use?

Motorcraft® Premium, Gold and Orange Antifreeze/Coolants are now available pre- mixed 50/50 with deionized water.

What type of coolant does a 2009 Ford Flex take?

Notes: Prestone max antifreeze/coolant all vehicles – 56/44 premixed – 1 gallon.

Is 1 gallon enough coolant?

one 1 gallon jug of straight coolant(2 gallons mixed 50/50) will do fine 99% of the time.

What kind of coolant does a 2010 Ford Flex take?

Peak OET North American yellow 50/50 pre-diuted; 1 gallon.

Should I pour coolant directly into the radiator?

On all vehicles that have a reservoir you add it to the reservoir, unless it is totally empty, then you can add it to the radiator directly. Once the radiator is full you will want to finish topping it off through the reservoir. If you just need to add because it is loww, then always use the reservoir.

How much coolant fluid do I need?

How much coolant your car holds and thus will require depends entirely on its engine and cooling system. A relatively small displacement 4-cylinder engine could contain as few as six or seven quarts, while a large American V-8 engine might hold more than 16 quarts.

How much coolant will a car take?

How much coolant is needed in a car? The average car’s cooling system holds about 5 litres of coolant – and most vehicles require between 3 and 7 litres of coolant at a time.

What Colour is Ford antifreeze?

This antifreeze was always red/pink in colour, Ford are now producing this in different shades, it will mix with your existing coolant. This Anti-Freeze is suitable for the majority of Fords but there may be some exceptions.

How much coolant do I need to fill an empty radiator?

An average engine holds about 3 quarts (2 liters) of coolant, but this amount may vary depending on the vehicle’s make, model, and type. For example, some Toyota models use only 1.5 quarts (1.5 liters), while others require 3 quarts (3 liters).

What kind of coolant does a 2017 Ford Flex take?

ZEREX – G05® Full Strength Concentrate Antifreeze / Coolant, 1 Gallon (Part No. ZXG051) ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment