Dodge Nitro Coolant Capacity
The amount of coolant needed for a Dodge Nitro can vary depending on the specific model year and engine installed. However, a general guideline for coolant change is every 40,000-50,000 miles. The process involves flushing out the entire system of contaminants and replacing the coolant mixture with fresh coolant and water. It’s important to use the appropriate type of antifreeze, as Dodge Nitro engines are designed to use HOAT antifreeze. The type of antifreeze used and the water used to mix it are crucial to the proper functioning of the cooling system.
To determine the specific coolant capacity for your Dodge Nitro, it’s recommended to consult the vehicle’s manual or reach out to a certified mechanic for accurate information.
Conclusion
The specific amount of coolant required for a Dodge Nitro depends on the model year, engine installed, and other conditions. It’s important to follow the manufacturer’s guidelines and use the appropriate type of antifreeze for optimal performance. If you need precise information on the coolant capacity for your specific Dodge Nitro, it’s best to refer to the vehicle’s manual or consult a certified mechanic.
Contents
- What happens if you use the wrong color antifreeze?
- What antifreeze does Dodge use?
- How many quarts of oil does a Dodge Nitro 3.7 take?
- How many quarts does a 3.7 L take?
- How much does it cost to fill up a 2008 Dodge Nitro?
- How many gallons are in a Dodge Nitro?
- What coolant does 2011 Dodge Nitro take?
- How many gallons of gas does a 2009 Dodge Nitro hold?
- What coolant goes in a 2008 Dodge Nitro?
- What color is coolant in a Dodge?
What happens if you use the wrong color antifreeze?
As mentioned above, the mix can solidify, block your engine, and cause overheating, which can, in turn, cause the following problems: Degraded cylinder heads. Head gasket breakage. Marred hoses.
What antifreeze does Dodge use?
Prestone® Platinum antifreeze + coolant uses Advanced Original Equipment Technology for use in all Jeep, Ram, Dodge & Chrysler vehicles from 2000 & newer.
How many quarts of oil does a Dodge Nitro 3.7 take?
5 quarts
Capacity: 5 quarts (with filter). After refill check oil level.
How many quarts does a 3.7 L take?
Capacities and Specifications – 3.7L
| Item | Capacity |
|---|---|
| Engine oil | 6.0 qt (5.7 L) |
| Engine coolant | 13.2 qt (12.5 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive) | 2.4 pt (1.15) |
How much does it cost to fill up a 2008 Dodge Nitro?
Compare Side-by-Side
| 2008 Dodge Nitro 4WD | |
|---|---|
| Annual Fuel Cost* | $3,000 |
| Cost to Drive 25 Miles | $4.97 |
| Cost to Fill the Tank | $66 |
| Tank Size | 19.5 gallons |
How many gallons are in a Dodge Nitro?
19.5 gal
Fuel & MPG
312.0/429.0 mi. 19.5 gal.
What coolant does 2011 Dodge Nitro take?
Prestone – Antifreeze and Coolant: 50/50 Ready To Use, Dex-Cool Compatible, 1 Gallon (Part No. AF850)
How many gallons of gas does a 2009 Dodge Nitro hold?
Used 2009 Dodge Nitro SE – Specs & Features
| Fuel & MPG | |
|---|---|
| EPA city/highway MPG | 16/22 MPG |
| EPA combined MPG | 18 MPG |
| Range in miles (city/hwy) | 312.0/429.0 mi. |
| Fuel tank capacity | 19.5 gal. |
What coolant goes in a 2008 Dodge Nitro?
Use only HOAT coolant to refill it. I use Zerex G-05.
What color is coolant in a Dodge?
What color coolant does Dodge use? It’s essential to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are usually orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.
