Coolant Capacity of a 2010 Dodge Nitro
The coolant capacity for a 2010 Dodge Nitro depends on the engine installed and other conditions. The exact amount of coolant needed can vary, and it is recommended to check the user’s manual for the specific capacity for your vehicle. The process of changing the coolant in a 2010 Dodge Nitro is a bit tricky and can take up to 12 hours to complete. It’s important to note that all capacities listed are approximate, and it’s recommended to check fluid levels when adding or refilling as recommended in the user’s manual.
It’s also worth noting that it is a good practice to change the coolant every 40,000-50,000 miles as part of preventative maintenance to keep the car healthy and on the road.
The type of coolant used in the Dodge Nitro is important. The Nitro engines are designed to use HOAT antifreeze, and using any other type of antifreeze can cause premature failure of the internal parts of the engine, gaskets, and seals. It’s also important to use the recommended type of water when mixing your own coolant, as most tap water contains additives and dissolved minerals that can create deposits in the coolant over time and cause problems.
In summary, the specific coolant capacity for a 2010 Dodge Nitro depends on the engine installed and other conditions, and it is recommended to refer to the user’s manual for the exact capacity. Additionally, using the correct type of coolant, such as HOAT antifreeze, is crucial for the proper functioning and longevity of the engine .
Contents
- How much transmission fluid does a Dodge Nitro hold?
- How much antifreeze does a Dodge Nitro take?
- Why is my 2010 Dodge Nitro overheating?
- How many quarts does a 2010 Dodge Nitro take?
- How much transmission fluid does a 2010 Dodge Nitro hold?
- How much oil does a 4.0 Dodge Nitro take?
- How many quarts does a 3.7 V6 take?
- How much coolant does a 2007 Dodge Nitro take?
- How much coolant does a Dodge Nitro hold?
- How much oil does a 3.7 Dodge Nitro take?
How much transmission fluid does a Dodge Nitro hold?
Automatic Transmission Fluid
Capacity: 4 speed 42RLE Total Fill 8.8 quarts. Capacity: 4 quarts Initial Fill.
How much antifreeze does a Dodge Nitro take?
SPECIFICATIONS Dodge Nitro 2008
Description | Type | Capacities |
---|---|---|
U.S. | ||
Cooling System | ||
♦ Engine Coolant (3.7L and 4.0L Engines) | MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) | 14 Quarts |
Why is my 2010 Dodge Nitro overheating?
The most common reasons a Dodge Nitro is overheating are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.
How many quarts does a 2010 Dodge Nitro take?
5 quarts
Capacity: 5 quarts (with filter). After refill check oil level.
How much transmission fluid does a 2010 Dodge Nitro hold?
4 quarts
Automatic Transmission Fluid
4 quarts Initial Fill.
How much oil does a 4.0 Dodge Nitro take?
Oil Grade: SEO11
Viscosity: | 10W-30 (All TEMPS) |
---|---|
Capacity: | 5.5 quarts (with filter). After refill check oil level. |
Torque: | 20 ft/lbs (Oil Drain Plug) |
How many quarts does a 3.7 V6 take?
Capacities and Specifications – 3.7L
Item | Capacity |
---|---|
Engine oil (with oil filter) | 6.0 qt (5.7 L) |
Engine coolant | 11.7 qt (11.1 L) |
Brake fluid | Between MIN/MAX on brake fluid reservoir |
Rear differential fluid (All Wheel Drive) | 2.4 pt (1.15L) |
How much coolant does a 2007 Dodge Nitro take?
@ 4000 rpm Max. Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
How much coolant does a Dodge Nitro hold?
Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
How much oil does a 3.7 Dodge Nitro take?
5 quarts
Capacity: With filter 5 quarts. After refill check oil level.