Based on the search results, the 2004 Acura TSX requires approximately 5.6-5.7 quarts of coolant for both manual and automatic transmission models. This is equivalent to around 1.4-1.43 gallons of coolant. It is recommended to use the Honda/Acura Type 2 Antifreeze/Coolant or an equivalent product .
Please note that it’s always a good idea to consult your owner’s manual or contact a certified Acura dealer for the most accurate and up-to-date information regarding your specific vehicle model.
Contents
- How much coolant does a 2006 Acura TSX take?
- How often do you need to change the coolant in a Acura TSX?
- How often should you flush the coolant in a Acura TSX?
- How much coolant fluid do I need?
- How many gallons of coolant do I need for a flush?
- How much coolant does a 2005 Acura TSX take?
- How many bottles of coolant do I need?
- What coolant does a 2004 Acura TSX take?
- What color coolant does Acura use?
- Can you overfill coolant?
How much coolant does a 2006 Acura TSX take?
2006 Acura TSX Specifications
| Powertrain | 2006 Acura TSX |
|---|---|
| Traction Control System (TCS) | Incorporated into VSA |
| Capacities | . |
| Crankcase | 5.3 |
| Cooling System | MT 7.2 U.S. qt. AT 7.1 U.S. qt. |
How often do you need to change the coolant in a Acura TSX?
Typically, you should have your Acura TSX coolant flush completed every 30,000 miles or every two years.
How often should you flush the coolant in a Acura TSX?
How often should you change coolant in a Acura TSX? Typically, you should have your Acura TSX coolant flush completed every 30,000 miles or every two years.
How much coolant fluid do I need?
How much coolant your car holds and thus will require depends entirely on its engine and cooling system. A relatively small displacement 4-cylinder engine could contain as few as six or seven quarts, while a large American V-8 engine might hold more than 16 quarts.
How many gallons of coolant do I need for a flush?
Most vehicles need 1–1.5 gallons of pure coolant after flushing, check owner manual if need be.. I only use a flush for extremely corroded systems. I drain, fill with water and drive it, letting the water system flush the system for up to 1 week with a weak coolant solution. Than drain and fill as normal.
How much coolant does a 2005 Acura TSX take?
2005 Acura TSX Specifications
| POWERTRAIN | |
|---|---|
| Engine Type | 16-valve, DOHC, 2.4-liter, i-VTEC 4-cylinder |
| CAPACITIES | |
| Crankcase | 5.3 |
| Cooling System | MT 7.4 U.S. qt. AT 7.3 U.S. qt. |
How many bottles of coolant do I need?
Depending on the make and model of the vehicle, as well as the cooling system type, most automobiles require between 3 and 7 liters of coolant. However, the average vehicle cooling system holds 5 liters of engine coolant.
What coolant does a 2004 Acura TSX take?
PEAK OET Antifreeze / Engine Coolant PAB0B3
Blue Extended Life, Asian Vehicle.
What color coolant does Acura use?
What color coolant does Acura use? It’s exciting to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are usually orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.
Can you overfill coolant?
An excess of coolant has the potential to cause electrical damage in your vehicle. In some cases, the excess coolant can be accommodated by your engine and exits the engine through the overflow hose. However, it is always a good idea to make sure that your coolant isn’t above the maximum fill line.
