Based on the search results, the 1985 Toyota MR2 requires approximately 12 liters of coolant for a coolant change. The full capacity of the cooling system is 12.8 liters, but it is unlikely that you will be able to drain out every last drop of coolant. Toyota recommends using a good brand of ethylene-glycol based coolant for the MR2, and their own coolant called Forlife is recommended for the Mk1 MR2. The Forlife coolant is somewhat expensive but is pre-mixed to the correct concentration .
Contents
What is my coolant capacity?
The average car’s cooling system holds about 5 litres of coolant – and most vehicles require between 3 and 7 litres of coolant at a time.
How much coolant does a MR2 take?
Coolant. You will need approximately 12 litres of coolant to carry out a coolant change (the full capacity of the system is 12.8 litres, but you are unlikely to drain absolutely all of it out).
How many Litres is a Toyota MR2?
The MR2 Roadster’s 1.8-litre engine has VVT-i (Variable Valve Timing-intelligent) for maximum mid-range torque (125lbft) and superb top-end power (140PS), with the best fuel consumption in its class (38.2mpg combined cycle). The MR2 Roadster is a sports car with striking looks.
Is the Toyota MR2 rare?
Though the number of completed models is fuzzy, it’s somewhere in the range of 90 vehicles—and as you might expect, they don’t appear very often.
Can you overfill coolant?
An excess of coolant has the potential to cause electrical damage in your vehicle. In some cases, the excess coolant can be accommodated by your engine and exits the engine through the overflow hose. However, it is always a good idea to make sure that your coolant isn’t above the maximum fill line.
How many gallons of engine coolant do I need?
With some engines, the right level of this mix will require as much as two gallons of antifreeze/coolant and approximately the same amount of water. Smaller engines will typically require less coolant.
What does MR2 stand for?
Midship Runabout 2-seater
3) The name MR2 stands for Midship Runabout 2-seater, though it should be noted that the initials MR also refer to the vehicle’s layout – mid-engine, rear-wheel drive.
How much should you fill coolant?
To make sure you have adequate fluid in the radiator, you should fill it, when it is cool, to the neck. After replacing the radiator cap, top up the fluid in the reservoir to somewhere between the min and max line. This way the reservoir fluid can help replace fluid lost through evaporation as well.
Is Toyota MR2 collectible?
The Toyota MR2 will likely appreciate in value. The second generation MR2, chassis code SW20, embraces a unique Ferrari-inspired styling, outstanding performance figures, and affordable prices that practically make the SW20 MR2 a steal in the collector car market.
Which year MR2 is the best?
However, many enthusiasts consider the second-generation MR2, produced from 1989 to 1999, to be the best overall. This generation featured a mid-engine layout, sleek styling, and impressive performance, particularly in the turbocharged versions.
