How much can a Subaru Impreza roof hold?

The roof load capacity of a Subaru Impreza varies depending on the specific model and roof type. According to the owner’s manual for the 2012 Subaru Impreza, the roof rack weight capacity is 150 lbs, which includes both the vehicle and the rack. However, for a 2013 Subaru Impreza with roof rails, the weight capacity is 150 lbs, while for a roof with molding, the weight capacity is 176 lbs.
Additionally, a forum post from a former employee of a company that sold roof racks and accessories mentioned that the maximum load for the 5th Gen Subaru Impreza is 150 lbs per bar. This information aligns with the weight capacity specified in the owner’s manual.
It’s important to note that the weight capacity may vary for different models and years of the Subaru Impreza, so it’s advisable to consult the specific owner’s manual for the accurate weight limit.
In summary, the roof load capacity for a Subaru Impreza ranges from 150 lbs to 176 lbs, depending on the model year and the type of roof (with or without molding). It’s crucial to adhere to these weight limits to ensure the safety and integrity of the roof rack system.

How much weight can a Subaru roof hold?

The roof rails also have a dynamic load capacity of 176 lb. and an impressive 700-lb static load limit (220 lb. and 880 lb. for Wilderness), allowing safe use of a roof-top tent.

What happens if you exceed roof rack weight limit?

In addition, dangers can arise due to the air stream and the increased centre of gravity of the vehicle. In the worst case, the increased centre of gravity can lead to overturning in the bend in the event of overloading.

How much weight can my car roof handle?

Most vehicles have a dynamic roof capacity of 165 Ibs. Static weight capacity is how much your vehicle can support when not in motion. A general guideline is that static weight capacity is roughly 8 to 10 times greater than the dynamic weight capacity.

What is the weight limit on the roof of a Subaru Impreza?

At speed, all of the aforementioned Subaru models have a roof rail capacity of 176 pounds, meaning that the tent – when stowed and at speed – has to weigh less.

Can a roof hold 200 pounds?

Regardless of how they’re constructed, most modern roofs can hold up to about ten feet of accumulated snow. And, because snow weighs about 20 pounds per cubic foot, it can be safely assumed that a structurally sound roof can withstand ~200 pounds of live load per square foot.

Will a roof take my weight?

The short answer is yes. It’s designed to withstand the combined weight of a temporary live load and a dead load to retain structural integrity. A clay tile or metal roof can hold a dead load of approximately 27 pounds per square foot.

Can a roof hold a 300lb person?

Roof Weight Standards
A minimum requirement is for roofs to be able to support a concentrated weight of 300lbs. Concentrated weight means that this load is placed directly on a single area on the roof.

Can a roof support a 400 lb person?

The load for normal shingled or wooden roofs follows the same code. With that in mind, the code typically starts out at 20 pounds per square foot. Residential roofs can hold a minimum of around 20 pounds per square foot then top out at 100 pounds per square foot.

Will my car support a rooftop tent?

The rule of thumb is if you can fit roof bars or a roof rack to your car then you can mount a roof tent to your vehicle. Check your vehicle’s roof or roof bar’s maximum weight limit and the weight of the roof tent. But most vehicle roofs will hold a roof tent plus a couple of adults with ease.

How much weight can I put on the roof of my car?

Again, the weight of the roof rack system should be calculated into the total weight a vehicle is carrying. The vehicle’s weight capacity also is only as good as its weakest component. That means that if the crossbars can handle 165 pounds, but the vehicle is rated for 150 pounds, then the limit is 150 pounds.