Based on the search results, the amount of transmission fluid required for a Chevy Impala can vary depending on the model year and transmission type. Here are some relevant findings:
– For 2014-2020 Chevy Impala models with a 6-speed 6T70 automatic transmission, the total fill capacity is 9.5 quarts (9 liters) and the initial fill capacity is 6.3 quarts (6 liters).
– For 2006-2013 Chevy Impala models with a 4-speed 4T65-E-HD automatic transmission, the total fill capacity is 13.4 quarts (12.7 liters) and the initial fill capacity is 7.4 quarts (7 liters).
– For 2000-2005 Chevy Impala models, the transmission fluid capacity is not explicitly mentioned in the search results.
It’s important to note that these figures represent the total and initial fill capacities. When performing a transmission fluid change by dropping the pan to change the filter, you may only see a portion of the total capacity being replaced, typically around 5-6 quarts.
To ensure accuracy, it is recommended to consult the owner’s manual or reach out to a certified Chevy dealer or mechanic for the specific transmission fluid capacity for your Chevy Impala model and year.
Contents
- Is 4 quarts enough transmission fluid?
- How much transmission fluid do you put in a 2007 Chevy Impala?
- How many quarts does an Impala take?
- How many quarts does a v6 Impala take?
- How much transmission fluid does a 2008 Impala 3.5 take?
- How many quarts of transmission fluid does a 2012 Impala take?
- How many quarts of transmission fluid does a Chevy Impala take?
- How many quarts of transmission fluid do I need for a 2007 Chevy Impala?
- How much transmission fluid do I add if empty?
- How many quarts are needed for a transmission fluid change?
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
How much transmission fluid do you put in a 2007 Chevy Impala?
Automatic Transmission Fluid
Capacity: 7.4 quarts Initial Fill.
How many quarts does an Impala take?
With filter 6 quarts.
How many quarts does a v6 Impala take?
6.3 quarts
6.3 quarts Initial Fill.
How much transmission fluid does a 2008 Impala 3.5 take?
Automatic Transmission Fluid
7.4 quarts Initial Fill.
How many quarts of transmission fluid does a 2012 Impala take?
For Automatic Transmission: 6T70….AF6
| Capacity: | 6 speed 6T70 Total Fill 9.5 quarts. |
|---|---|
| Capacity: | 5.3 quarts Initial Fill. |
How many quarts of transmission fluid does a Chevy Impala take?
7.4 quarts
Automatic Transmission Fluid
7.4 quarts Initial Fill.
How many quarts of transmission fluid do I need for a 2007 Chevy Impala?
Amsoil.com says initial fill for the transmission is 7.4 quarts with total capacity being 13.4 quarts. So pick up 8 or 9 quarts & you should be good.
How much transmission fluid do I add if empty?
If you notice the transmission fluid is a little low on the dipstick, start with a half a quart to a quart of transmission fluid. Recheck the level and add ¼ quart (or less) at a time until the level is up to the full or max mark.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
