Transmission Fluid Capacity for Ford Flex
The Ford Flex transmission fluid capacity is 12 quarts. This information is based on the owner’s manual for the 2019 Ford Flex, which specifies the total fill capacity for the 3.5L V6 6-Speed Automatic 6F50 as 10.9 quarts and the initial fill as 4.5 quarts.
It’s important to ensure that the correct type of transmission fluid is used. Ford recommends using Mercon V or Mercon LV transmission fluid in the Flex.
It’s crucial to maintain the proper level of transmission fluid to ensure the smooth operation and longevity of the transmission system.
If you have any further questions or need additional information, feel free to ask!
Contents
- How many quarts of transmission fluid does a 2014 Ford Flex take?
- What happens if you overfill transmission fluid?
- What type of transmission does a Ford Flex have?
- Is 4 quarts enough transmission fluid?
- How much transmission fluid does a Ford Flex hold?
- How much transmission fluid does a 2010 Ford Flex take?
- What does Ford recommend for transmission fluid change?
- How many quarts of transmission fluid does a Ford transmission hold?
- How many quarts of transmission fluid does it take to fill?
- What is the best transmission fluid for Ford Flex?
How many quarts of transmission fluid does a 2014 Ford Flex take?
10.9 quarts
For Automatic Transmission: 6F50….MLV
Capacity: 6 speed 6F50 Total Fill 10.9 quarts.
What happens if you overfill transmission fluid?
Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.
What type of transmission does a Ford Flex have?
The Ford Flex is powered by two different 3.5 L V6 engines, both paired to a 6-speed automatic transmission.
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
How much transmission fluid does a Ford Flex hold?
12.15 qt
Capacities and Specifications
| Item | Capacity |
|---|---|
| Automatic transmission fluid. | 12.15 qt (11.5 L)1 |
| Windshield washer fluid. | Fill as required |
| Fuel tank. | 18.5 gal (70 L) |
| A/C refrigerant (U.S. and Canada). | 21 oz (0.595 kg) |
How much transmission fluid does a 2010 Ford Flex take?
For Automatic Transmission: 6F50….MLV
Capacity: 6 speed 6F50 Total Fill 9.4 quarts.
What does Ford recommend for transmission fluid change?
When Should an Automatic Transmission Fluid Change Be Performed? The best time to have your automatic transmission serviced is when the maintenance schedule says it’s due. For many Ford vehicles under normal use, the service interval is around 150k miles.
How many quarts of transmission fluid does a Ford transmission hold?
| Transmission Fluid Capacity | |
|---|---|
| Transmission (w/ Stock Pan) | # of Quarts |
| Ford C4 | 5.5 |
| Ford C6 | 7 |
| Ford AOD/AODE | 6.5 |
How many quarts of transmission fluid does it take to fill?
In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much. It is advisable to put in little amounts at a time.
What is the best transmission fluid for Ford Flex?
Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No. XT10QLVC) The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
