Based on the search results, the amount of transmission fluid needed for a Chevy Impala can vary depending on the year and transmission type. Here are some relevant snippets:
– For 2014-2020 Chevy Impala models with a 6-speed 6T70 automatic transmission, the total fill capacity is 9.5 quarts (9 liters), with an initial fill of 6.3 quarts (6 liters).
– For 2006-2013 Chevy Impala models with a 4-speed 4T65-E-HD automatic transmission, the total fill capacity is 13.4 quarts (12.7 liters), with an initial fill of 7.4 quarts (7 liters).
– The 2007 Impala with the 3.5L engine requires over 7 quarts of transmission fluid, but not all of it comes out during a drain and fill. From experience, 7 quarts is about right.
It’s important to note that these are general guidelines, and it’s always a good idea to consult the owner’s manual or contact a certified mechanic for the most accurate information specific to your vehicle.
Contents
- How much transmission fluid does a 2008 Chevy Impala 3.5 take?
- How much fluid does a Chevy transmission hold?
- How many quarts are needed for a transmission fluid change?
- How much transmission fluid does a 2009 Chevy Impala 3.5 take?
- Is 4 quarts enough transmission fluid?
- How much transmission fluid does a 2004 Impala 3.4 take?
- How much transmission fluid does an Impala take?
- How much transmission fluid do I add if empty?
- How many quarts does a v6 Impala take?
- How many quarts does an Impala take?
How much transmission fluid does a 2008 Chevy Impala 3.5 take?
7.4 quarts
Automatic Transmission Fluid
7.4 quarts Initial Fill.
How much fluid does a Chevy transmission hold?
Automatic transmissions: 4L60-E: 11.2 quarts. 4L70-E: 11.2 quarts. 4L80-E: 13.5 quarts.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
How much transmission fluid does a 2009 Chevy Impala 3.5 take?
For Automatic Transmission: 4T65-E….AF6
| Capacity: | 4 speed 4T65-E Total Fill 13.4 quarts. |
|---|---|
| Capacity: | 7.4 quarts Initial Fill. |
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
How much transmission fluid does a 2004 Impala 3.4 take?
For Automatic Transmission: 4T65-E….AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 4 speed 4T65-E Total Fill 13.4 quarts. |
| Capacity: | 7.4 quarts Initial Fill. |
How much transmission fluid does an Impala take?
7.4 quarts
Automatic Transmission Fluid
Capacity: 7.4 quarts Initial Fill.
How much transmission fluid do I add if empty?
If you notice the transmission fluid is a little low on the dipstick, start with a half a quart to a quart of transmission fluid. Recheck the level and add ¼ quart (or less) at a time until the level is up to the full or max mark.
How many quarts does a v6 Impala take?
6.3 quarts
6.3 quarts Initial Fill.
How many quarts does an Impala take?
With filter 6 quarts.
