Transmission Fluid Capacity for 2010 Chevy Cobalt
The 2010 Chevy Cobalt has a transmission fluid capacity of 6.6 liters, which is approximately 6.97 quarts.
Therefore, to fully fill up the transmission, it would require approximately 6.97 quarts of transmission fluid, which may cost around $56 to $70, depending on the store and the brand of the fluid.
Contents
- How many quarts of transmission fluid for a 2010 Chevy Cobalt?
- How much transmission oil does a Chevy Cobalt take?
- What kind of transmission does a 2010 Chevy Cobalt have?
- Does a 2010 Chevy Cobalt have a transmission dipstick?
- How much transmission fluid do I need in a 2008 Chevy Cobalt?
- How many quarts are needed for a transmission fluid change?
- How much transmission fluid does a 2009 Chevy Cobalt take?
- What kind of transmission fluid does a Chevy Cobalt take?
- How much transmission fluid does a 2010 Chevy Cobalt 2.2 take?
- Is 4 quarts enough transmission fluid?
How many quarts of transmission fluid for a 2010 Chevy Cobalt?
Automatic Transmission Fluid
Capacity: 4 speed 4T45-E Total Fill 12.9 quarts. Capacity: 7 quarts Initial Fill.
How much transmission oil does a Chevy Cobalt take?
Automatic Transmission Fluid
Capacity: 6.9 quarts Initial Fill.
What kind of transmission does a 2010 Chevy Cobalt have?
5-speed manual
Used 2010 Chevrolet Cobalt – Specs & Features
| Drivetrain | |
|---|---|
| Transmission | 5-speed manual |
| Drive type | Front wheel drive |
Does a 2010 Chevy Cobalt have a transmission dipstick?
There is no dipstick on a cobalt. There is a black screw on cap on the top of the trans to the right of the motor. If you want to check your fluid level, raise the vehicle but make sure it is level from front to back.
How much transmission fluid do I need in a 2008 Chevy Cobalt?
Capacity: 4 speed 4T45-E Total Fill 12.9 quarts. Capacity: 7 quarts Initial Fill.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
How much transmission fluid does a 2009 Chevy Cobalt take?
For Automatic Transmission: 4T45-E….AF6
| Capacity: | 4 speed 4T45-E Total Fill 12.9 quarts. |
|---|---|
| Capacity: | 7 quarts Initial Fill. |
What kind of transmission fluid does a Chevy Cobalt take?
DEXRON®-VI
Castrol – Transmax ATF DEXRON®-VI Automatic Transmission Fluid 1 Quart (Part No. 15B1A0)
How much transmission fluid does a 2010 Chevy Cobalt 2.2 take?
The 2010 Chevrolet Cobalt has a transmission fluid capacity of 6.6 liters or 6.97 US quarts. The recommended F-TYPEor the vehicle is Dexron VI transmission fluid. The fluid is used as oil and a hydraulic fluid to help with gear shifts, to cool the transmission and lubricate moving parts.
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
