How many quarts of transmission fluid does a 2008 Chevy Impala take?

Transmission Fluid Capacity for 2008 Chevy Impala
The 2008 Chevrolet Impala requires approximately 7.4 quarts or 7 liters of transmission fluid for overall filling, as recommended by the manufacturer. The transmission holds about 6.3 quarts and is considered full when the fluid is at the bottom of the fill plug threads. It’s important to note that the automatic transmission fluid and filter should be serviced and flushed every 60,000 miles to maintain the transmission running properly and prevent any potential issues.

How many quarts does it take to fill up transmission fluid?

In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much.

How many quarts does a 2008 Chevy Impala 3.5 take?

4 quarts
Capacity: With filter 4 quarts. After refill check oil level.

How many quarts of transmission fluid does it take to flush a transmission?

12 to 22 quarts
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.

How much transmission fluid does a 2007 Impala take?

Automatic Transmission Fluid
7.4 quarts Initial Fill.

How much transmission fluid does a 2009 Chevy Impala 3.5 take?

For Automatic Transmission: 4T65-E….AF6

Capacity:	4 speed 4T65-E Total Fill 13.4 quarts.
Capacity:	7.4 quarts Initial Fill.

How much transmission fluid does a 2009 Chevy Impala take?

Dexron 6 for fluid and should be 7.5qrts.

How many quarts does a V6 Impala take?

6.3 quarts
6.3 quarts Initial Fill.

How do you add transmission fluid to a 2008 Chevy Impala?

Now we’ll take our long funnel. And place it in the tube we remove the transmission dipstick. From. Once the funnel has been inserted you can begin adding fluid.

How many quarts does a Chevy transmission hold?

Automatic transmissions: 4L60-E: 11.2 quarts. 4L70-E: 11.2 quarts. 4L80-E: 13.5 quarts.

How much transmission fluid goes in a Chevy Impala?

The repair manual says that roughly 7.4 quarts will be needed after replacing the filter and sensors in the transmission.