Based on the search results, it seems that there is some confusion regarding the exact amount of transmission fluid required for a 2007 Chevy Cobalt. However, I found a few snippets that provide some information:
One snippet mentions that the transmission fluid capacity for a 2006 Chevrolet Cobalt with a 4-speed automatic transmission is 12.9 quarts for a total fill or 6.9 quarts for an initial fill.
Another snippet suggests that adding fluid until it flows from the hole is an indication that the transmission is full. It also mentions that removing the lower pan should only require 7 quarts of fluid.
Please note that these snippets may not specifically mention the 2007 Chevy Cobalt, but they provide some insight into the transmission fluid capacity for similar models. It is always recommended to consult the owner’s manual or reach out to a certified mechanic for the most accurate information.
I hope this helps! Let me know if you have any other questions.
Contents
- How many quarts of transmission fluid does a 2009 Chevy Cobalt hold?
- How many quarts does a 2007 Chevrolet cobalt take?
- How many quarts are needed for a transmission fluid change?
- What kind of transmission fluid does a 2007 Chevy Cobalt take?
- How many quarts of transmission fluid does a 2005 Chevy Cobalt take?
- How much transmission fluid does a Chevy Cobalt hold?
- How much transmission fluid do I need?
- How much transmission fluid does a 2008 Chevy Cobalt hold?
- Does a 2007 Chevy Cobalt have a transmission dipstick?
- Is 4 quarts enough transmission fluid?
How many quarts of transmission fluid does a 2009 Chevy Cobalt hold?
For Automatic Transmission: 4T45-E….AF6
| Capacity: | 4 speed 4T45-E Total Fill 12.9 quarts. |
|---|---|
| Capacity: | 7 quarts Initial Fill. |
How many quarts does a 2007 Chevrolet cobalt take?
5.1 quarts
Capacity: With filter 5.1 quarts. After refill check oil level.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
What kind of transmission fluid does a 2007 Chevy Cobalt take?
Castrol Transmax Dexron VI Mercon LV Automatic Transmission Fluid 1 Quart.
How many quarts of transmission fluid does a 2005 Chevy Cobalt take?
For Automatic Transmission: 4T45-E….AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 4 speed 4T45-E Total Fill 12.9 quarts. |
| Capacity: | 6.9 quarts Initial Fill. |
How much transmission fluid does a Chevy Cobalt hold?
You have to add fluid until it flows from the hole, that’s when you know it’s full. Transmission has to be at operating temperature with engine running. Dry, the trans will take 12.9 quarts, and just removing the lower pan should only require 7 quarts.
How much transmission fluid do I need?
How much transmission fluid your vehicle needs ranges from as few as 8-9 quarts for small passenger vehicles to more than 20 quarts for heavy-duty trucks. As you do when determining how often to change transmission fluid, check your owner’s manual for the transmission fluid capacity.
How much transmission fluid does a 2008 Chevy Cobalt hold?
12.9 quarts
Automatic Transmission Fluid
Capacity: 4 speed 4T45-E Total Fill 12.9 quarts. Capacity: 7 quarts Initial Fill.
Does a 2007 Chevy Cobalt have a transmission dipstick?
There is no dipstick on a cobalt. There is a black screw on cap on the top of the trans to the right of the motor.
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
