Transmission Fluid Capacity for 2000 Ford Excursion
The 2000 Ford Excursion has varying transmission fluid capacities depending on the specific circumstances of the fluid change. Here are the details:
– Transmission Fluid Capacity:
– When changing the fluid and filter, it takes 4 to 5 quarts.
– If the whole transmission is drained, it takes 14 to 15 quarts.
– When equipped with an automatic transmission, the Ford Excursion requires 17.6 quarts of transmission fluid or 11.7 quarts with a manual transmission.
It’s important to note that the capacity can differ based on the specific maintenance or repair being performed on the transmission.
If you have any further questions or need additional information, feel free to ask!
Contents
- What kind of transmission fluid does a 2000 Ford Excursion 7.3 take?
- How many quarts of transmission fluid does a Ford transmission hold?
- How many quarts of transmission fluid does a Ford Excursion take?
- How many quarts does a 2000 7.3 take?
- How much ATF does a 7.3 Powerstroke take?
- How much transmission fluid does a 7.3 hold?
- How much transmission fluid does a 2000 Ford f250 hold?
- How many quarts does a 7.3 transmission take?
- How much transmission fluid does a 2002 Ford Excursion 7.3 hold?
- How much transmission fluid does a 2000 Ford f250 7.3 hold?
What kind of transmission fluid does a 2000 Ford Excursion 7.3 take?
All. Note: Only use MERCON® ULV transmission fluid for automatic transmissions that require MERCON® ULV transmission fluid. The use of any other fluid could cause transmission damage.
How many quarts of transmission fluid does a Ford transmission hold?
| Transmission Fluid Capacity | |
|---|---|
| Transmission (w/ Stock Pan) | # of Quarts |
| Ford C4 | 5.5 |
| Ford C6 | 7 |
| Ford AOD/AODE | 6.5 |
How many quarts of transmission fluid does a Ford Excursion take?
When adding or replacing transmission fluid in a vehicle with a torqshift automatic transmission, use Mercon LV fluid. Capacity: 5 speed TorqShift Total Fill 19 quarts.
How many quarts does a 2000 7.3 take?
15 quarts
Engine Oil
Capacity: With filter 15 quarts. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
How much ATF does a 7.3 Powerstroke take?
a. The transmission system holds almost 18 quarts of ATF, and you must waste a couple of quarts to be sure you get it all purged and replaced, so buy 20 quarts of MERCON or MERCON V ATF. You may use either conventional or synthetic, as long as it meets the above requirements.
How much transmission fluid does a 7.3 hold?
Fluids and Capacities
| 7.3 PSD Fluid Capacities | ||
|---|---|---|
| Oil | Capacity | |
| Transmission Fluid (Manual) | MERCON V Full Synthetic ATF | ZF S5 3.4 quarts ZF S6 5.8 quarts |
| Transfer Case Fluid | Motorcraft XL-12 transfer case fluid | 2.0 quarts |
| Dana 50 Differential Fluid | SAE 80W-90 Gear Oil | 1.9 quarts |
How much transmission fluid does a 2000 Ford f250 hold?
For Automatic Transmission: 4R100….MA5
| Notes: | (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts. |
| Capacity: | 4 speed 20 Plate OAC 4R100 Total Fill 17 quarts. |
| Capacity: | 6.4 quarts Initial Fill. |
How many quarts does a 7.3 transmission take?
5.81 QTS. Fill to line on reservoir.
How much transmission fluid does a 2002 Ford Excursion 7.3 hold?
Automatic Transmission Fluid
Capacity: 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts. Capacity: 6.4 quarts Initial Fill.
How much transmission fluid does a 2000 Ford f250 7.3 hold?
Automatic Transmission Fluid
4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts. Capacity: 6.4 quarts Initial Fill.
