AHG Auto Service » Make » Dodge » How many quarts of transmission fluid does a 2000 Dodge Dakota take?

How many quarts of transmission fluid does a 2000 Dodge Dakota take?

Based on the search results, the transmission fluid capacity for a 2000 Dodge Dakota can vary depending on the transmission type and whether it is a dry fill or a simple fluid change. Here are the findings:
– For a simple fluid change on a 46re transmission, it should take around 4.1 quarts of ATF.
– For a dry fill on a 46re transmission with overdrive (4-speed), it can take up to 11.7 quarts.
– The 47re transmission (4-speed) in a Ram could take as much as 17 quarts for a dry fill.
Since you mentioned that it is a 2000 Dodge Dakota with a 4.7 automatic transmission, it is likely that the transmission is a 46re. Therefore, for a simple fluid change, you would need approximately 4.1 quarts of ATF.
Please note that it is always a good idea to consult the owner’s manual or contact a certified mechanic for the most accurate and up-to-date information regarding your specific vehicle.
Let me know if there’s anything else I can help with!

What transmission fluid goes in a 2000 Dodge Dakota?

ATF+4®
Valvoline – ATF+4® Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. 822348)

How many quarts of oil does a 2000 Dodge Dakota 3.9 L take?

Capacity: With filter 4.5 quarts. After refill check oil level.

How many quarts of transmission fluid does a 2000 Dodge Durango take?

For Automatic Transmission: 46RE….AP4

Capacity: 4 speed 46RE Total Fill 10 quarts.
Capacity: 4 quarts Initial Fill.

How many quarts does a Dodge Dakota hold?

Capacity: With filter 4 quarts. After refill check oil level.

How much transmission fluid does a 2001 Dodge Dakota take?

For Automatic Transmission: 45RFE….AP4
Capacity: 4 speed 45RFE Total Fill 14.1 quarts.

Is 4 quarts enough transmission fluid?

Make sure that the fluid level is within the safe zone. It should be between the two marks in a warm engine. In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up.

How many quarts of transmission fluid does it take to fill up a transmission?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

How many quarts does a 2001 Dodge Dakota take?

Pour in 5 quarts of motor oil then check the dipstick as you add the 6th quart. Stop once the dipstick reads the correct level. The preferred oil viscosity is 5W-30.

How many quarts of transmission fluid does a Dodge Dakota hold?

Automatic Transmission Fluid
Capacity: 4 speed 46RE Total Fill 10 quarts. Capacity: 4 quarts Initial Fill.

How many quarts of transmission fluid do I need for a drain and fill?

Yes, you can add transmission fluid without changing it. However, it is important to keep in mind that adding new fluid to old fluid may not always be the best solution. It generally takes a lot of fluid to flush an automatic transmission. 15 to 20 quarts is not uncommon.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment