The Subaru Ascent takes 4.8 quarts of oil with a filter. It is recommended to use 0W-20 oil for the Subaru Ascent [[4]] [[10]].
Contents
- What kind of oil does a Subaru 2.5 L engine take?
- How many quarts does a 2.5 L engine take?
- Does the Subaru Ascent tell me when to change oil?
- How much oil does a 2.5 L Subaru engine take?
- Does Subaru Ascent require synthetic oil?
- How many quarts of oil does my Subaru take?
- What kind of oil does a Subaru Ascent take?
- How often does Subaru Ascent need oil change?
- Why do Subarus use so much oil?
- How much oil does a Subaru 2.4 Turbo engine hold?
What kind of oil does a Subaru 2.5 L engine take?
Oil Grade: SN
Viscosity: | All TEMPS….0W-20 – If 0W-20 synthetic oil is not available,5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. |
---|---|
Torque: | Oil Drain Plug…31 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
How many quarts does a 2.5 L engine take?
Capacities and Specifications – 2.5L
Item | Capacity |
---|---|
Engine oil (with oil filter). | 5.7 qt (5.4 L) |
Engine coolant. | 7.2 qt (6.8 L) |
Brake fluid. | Between MIN/MAX on brake fluid reservoir |
Automatic transmission fluid.* | 9.0 qt (8.5 L) |
Does the Subaru Ascent tell me when to change oil?
Don’t forget that your Subaru also has indicator lights in the dash that will alert you when your oil system needs immediate attention. An amber-colored oil light indicates the pressure of the oil system is low.
How much oil does a 2.5 L Subaru engine take?
5.1 quarts
For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you’ll want to check the level to make sure you don’t have too much or not enough oil.
Does Subaru Ascent require synthetic oil?
So, what type of oil does the Subaru Ascent take? The recommended Subaru Ascent oil type is 0W-20 full-synthetic oil, which offers maximum protection from corrosion and improved gas mileage on Town ‘n’ Country roads.
How many quarts of oil does my Subaru take?
Subaru Oil Guide:
Model | Subaru Oil Required | Capacity |
---|---|---|
Subaru Impreza 2012 – 2021 | 0W-20 Synthetic Oil | 4.7 – 5.3 Quarts |
Subaru Legacy & Outback 2002 – 2012 | 5W-30 Conventional Oil | 4.4 Quarts |
Subaru Legacy & Outback 2013 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
Subaru Legacy Turbo 2005 – 2010 | 5W-30 Conventional Oil | 4.5 Quarts |
What kind of oil does a Subaru Ascent take?
The recommended Subaru Ascent oil type is 0W-20 full-synthetic oil, which offers maximum protection from corrosion and improved gas mileage on Watsovnille roads.
How often does Subaru Ascent need oil change?
Subaru suggests getting your 2022 Subaru Ascent oil & filter changed each 3,000-5,000 miles for conventional oil. Synthetic oil frequently should be changed each 7,500 – 10,000 miles.
Why do Subarus use so much oil?
There are 6 key factors that can cause your Subaru to guzzle oil more quickly which are as follows: Wear to the seals or gaskets will result in oil leaks. Poor oil quality will burn up faster than high quality oil. Worn piston rings will allow oil to escape and be burned inside the combustion chamber.
How much oil does a Subaru 2.4 Turbo engine hold?
4.8 quarts
Capacity: With filter 4.8 quarts. After refill check oil level.