AHG Auto Service » Make » Ford » How long do Ford Fusion wheel bearings last?

How long do Ford Fusion wheel bearings last?

How long do Ford Fusion wheel bearings last?
Wheel bearings in a Ford Fusion typically have an average lifespan of around 85,000 to 100,000 miles (136,000 to 160,000 km). However, it’s important to note that this is just a general estimate, and the actual lifespan of a wheel bearing can vary depending on various factors such as driving conditions, quality of the bearing, and maintenance.
Factors such as driving on bad roads with potholes, driving over curbs with force, or driving quickly around corners can significantly reduce the service life of the wheel bearings. Additionally, wheel bearings can be damaged if the vehicle hits a pothole, curb, or speed bump too hard, or if water, grit, salt, or sand contaminate the grease in the hub assembly.
It’s important to pay attention to any signs of wear or damage in the wheel bearings, such as excessive vibration in the steering wheel or the vehicle pulling to one side. If you notice any of these symptoms, it is recommended to have the wheel bearings inspected and replaced if necessary by a qualified mechanic.
Please note that the information provided is based on general knowledge and search results, and it’s always a good idea to consult with a professional mechanic or refer to the vehicle’s manual for specific information regarding your Ford Fusion’s wheel bearings.

What are signs of a bad wheel bearing?

Watch out and listen for these signs:

  • Humming Noise. The most easily identifiable and common symptom of bad wheel bearings is audible.
  • Squealing, Growling.
  • Clicking Sound.
  • Wheel Wobble.
  • ABS Failure.
  • Uneven Tire Wear.
  • Vehicle Pulls to One Side.
  • Steering Wheel Vibration.

Can I still drive with a bad wheel bearing?

Can I drive with a bad wheel bearing? No, it can be very dangerous. The bearings can cause a severe problem if they malfunction. As we said before, extreme heat can be caused by friction, and this can cause a sudden seize of the bearing, causing the wheel to get blocked at whatever speed we are driving at that moment.

Can I drive with a bad wheel bearing?

Can I drive with a bad wheel bearing? No, it can be very dangerous. The bearings can cause a severe problem if they malfunction. As we said before, extreme heat can be caused by friction, and this can cause a sudden seize of the bearing, causing the wheel to get blocked at whatever speed we are driving at that moment.

How often do wheel bearings need to be replaced?

every 85,000-100,000 miles
You should expect to replace wheel bearings every 85,000-100,000 miles. However, this number is only a guess, as it also depends on the quality of the bearings. Unless both bearings on all side of the wheels are overworked, there is no need to replace them all at once.

Can wheel bearings last 200000 miles?

We hear tell of wheel bearings lasting the life of the vehicle, like 200,000 miles and up. Conversely, some cars (cough*old Subarus*cough) seem to go through wheel bearings every few years or so. It often boils down to both the vehicle and the driving conditions.

How much does it cost to replace a wheel bearing on a Ford Fusion?

What’s the cost for wheel bearing replacement on my Ford. For a national average across all vehicles, the average cost to replace the wheel bearings (for 1 wheel) is about $350 (including parts and labor).

How long do Ford wheel bearings last?

approximately 85,000 to 100,000 miles
Wheel bearings have an average lifespan of 136,000 to 160,000 km (approximately 85,000 to 100,000 miles).

What are the first signs of bearing failure?

If your bearing is suddenly noisy during operation, you’re looking at a bearing failure. This excess noise is created when the raceways of the bearing have become damaged, causing the rolling elements to bounce or rattle during rotation.

How long can I ride on a bad wheel bearing?

1,000 miles
Typically, you shouldn’t exceed 1,000 miles on a bad wheel bearing. Driving for distances longer than 1,000 miles could lead to serious complications with your vehicle. Continuing to put stress on this wheel bearing will also hurt the hub, CV joint, and even the transmission.

Should I replace all 4 wheel bearings at once?

If Only One Bearing Is Bad, Do I Have To Replace Them Both? No. Your car’s wheel bearings are entirely separate, and a failure in one bearing does not affect the others. You only need to replace the bearing that has failed.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment