How Long Do Ball Joints Last on a Subaru Outback?
Based on the information gathered from various sources related to Subaru Outback ball joints, it can be concluded that the lifespan of ball joints on a Subaru Outback can vary. Here’s a summary of the findings:
1. Lifespan of Ball Joints:
– Ball joints on a Subaru Outback usually last between 70,000 and 150,000 miles. However, it’s important to note that they can fail at any time, so regular inspection is recommended.
2. Robustness of Subaru Ball Joints:
– The ball joints on a Subaru Outback are considered to be robust and solid. Some users have reported that their ball joints lasted over 16 years and 265,000 miles before starting to fail.
3. Maintenance and Replacement:
– It’s recommended to use anti-seize when installing a new ball joint, and regular inspection of the suspension system is advised to detect any issues with the ball joints.
4. Replacement Parts:
– Genuine OEM Subaru ball joints are recommended for replacement to ensure longevity.
In conclusion, the lifespan of ball joints on a Subaru Outback can vary, but regular inspection and maintenance are crucial to ensure the safety and performance of the vehicle.
If you have any further questions or need additional information, feel free to ask!
Contents
- How do you check a Subaru ball joint?
- How much does it cost to replace ball joints on a Subaru Outback?
- What mileage do ball joints go bad?
- How much does it cost to replace a ball joint on a Subaru?
- Is it OK to drive with a bad ball joint?
- Is replacing ball joints a big job?
- Can you replace just the ball joint without replacing control arm?
- Should I replace all 4 ball joints?
- How do I know if my ball joints are going bad?
- Do you need an alignment after replacing ball joints?
How do you check a Subaru ball joint?
To check a ball joint for horizontal play you need to grab the 12 o’clock and 6 o’clock positions of the wheel and rock the top and bottom of the wheel in and out. If you can hear clunking or grinding or you can see excessive movement in the ball joint then it probably needs to be replaced.
How much does it cost to replace ball joints on a Subaru Outback?
The average cost for Subaru Outback Ball Joint Replacement is $221.
What mileage do ball joints go bad?
70,000 to 150,000 miles
Ball joints typically last 70,000 to 150,000 miles depending on their usage and road conditions. Clunking noises, poor handling, pulling, and abnormal wearing of your tires are all signs of a worn ball joint. If you see uneven tread wear patterns on your tire, you should have your ball joints checked.
How much does it cost to replace a ball joint on a Subaru?
The average cost for a Suspension Ball Joint Replacement is between $252 and $345.
Is it OK to drive with a bad ball joint?
What are the risks of driving with a bad ball joint? A worn ball joint is not a problem that should be ignored. If the wear becomes severe, the stud may separate from the housing resulting in immediate loss of control of your vehicle.
Is replacing ball joints a big job?
Ball joint replacement is not straightforward, as they can be very tricky to access and install – especially with age and rust.
Can you replace just the ball joint without replacing control arm?
In the case of a ball joint mounted on a cast track control arm you can often settle for only replacing the ball joint if the bushings of the track control arms do not show signs of wear and tear.
Should I replace all 4 ball joints?
This means that if you have a problem with your ball joint, the entire assembly will usually need to be replaced.
How do I know if my ball joints are going bad?
Wiggle. It back and forth pushing in and out feeling for any play. When I say play you’re gonna feel some type of movement your tires should be solid.
Do you need an alignment after replacing ball joints?
There’s no denying that it’s very important to replace your ball joints when needed. However, it’s worth noting that doing that doesn’t necessarily mean you need an alignment. The only time you need one after replacing the ball joints is if the previous alignment was performed when ball joints were not in good shape.