How do you use the scissor jack on a Dodge Ram?

To use a scissor jack on a Dodge Ram, follow these steps:
1. Locate the recommended jack points: If you are using a scissor jack, you will need to raise up each side of the rear end using the rear axle since scissor jacks do not have the weight capacity to lift the differential. If using a floor jack, you can lift the rear by using the differential.
2. Position the jack: Place the scissor jack under the recommended jack point. Make sure the jack is positioned securely and on a stable surface.
3. Operate the jack: Use the provided handle or a suitable tool to turn the crank or screw mechanism on the scissor jack. This will raise the jack and lift the vehicle off the ground. Keep turning until the vehicle is at the desired height.
4. Secure the vehicle: Once the vehicle is lifted, it is important to secure it with jack stands before working underneath. Place the jack stands at the appropriate points on the vehicle’s frame or designated lift points.
5. Lower the vehicle: To lower the vehicle, slowly turn the crank or screw mechanism in the opposite direction. Lower the vehicle until it is resting securely on the ground.
Remember to consult your vehicle’s user manual for specific instructions and safety precautions.

Where is the jack on a Dodge Ram?

The jack is located under the passenger seat turn the wing bolt counterclockwise.

Where do you put the jack on a Ram 1500?

Lift the rear of your RAM 1500 using the jack under the differential. Place a jack stand under the rear axle. Slowly lower the vehicle onto the jack stand for stability.

How do you jack up the front of a Ram 1500?

Then slowly lower your vehicle until it is stable on the jack. Stand. You can now remove the wheel if needed for safety slip it under the vehicle as additional protection.

Where do you put the jack to lift the front?

Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).

Where to jack up 2017 Ram 1500?

Showing the Jack actually facing the front of the truck when I say the Jack facing. I mean the eyelet. So you can Assemble your extensions and your tire. Tool. There is not an actual pad. There.

How do you lower the spare tire on a Ram 1500?

The handle comprised of all the extension tubes locks. At all positions except the lug wrench attachment insert the tube through the access hole between the lower tailgate. And the top of the bumper.

How do you lower the spare tire on a 2015 Dodge Ram?

Tire. Now while the truck is still on the ground loosen.

Where to jack up a Dodge Ram 1500?

Lift the rear of your RAM 1500 using the jack under the differential. Place a jack stand under the rear axle. Slowly lower the vehicle onto the jack stand for stability.

Where do you put the jack when changing a tire on a Ram 1500?

Now look for the proper jacking locations for a front wheel place the scissor jack under the rear portion of the lower control arm with the handle extended diagonally toward the rear of the vehicle.

What is tire jack mode on a Ram 1500?

Areas. If your vehicle is equipped with air suspension. You’ll need to enable tire jack mode in the Uconnect system with the engine running. This will disable automatic leveling when changing a tire.