How do you use the line lock on a Dodge Charger?

Using Line Lock on a Dodge Charger
To use the line lock feature on a Dodge Charger, follow these steps:
1. Accessing Line Lock:
– The line lock feature is typically available through the car’s computer system. On some models, it may be accessible through the SRT pages app or the car’s settings menu.
2. Engaging Line Lock:
– Once the line lock feature is accessed, it usually requires a significant amount of brake pressure to work effectively. Ensure that you are applying the necessary brake pressure as instructed.
3. Disengaging Line Lock:
– After using the line lock feature, it’s important to release the switch or toggle that activates it. This is crucial to disengage the line lock and resume normal driving.
4. Considerations:
– Some users have opted for aftermarket solutions, such as the Hurst line lock kit or the HEMI Tazer Unlocker & Line Lock Kit by Z Automotive, to enable the line lock feature on their Dodge Chargers ,.
Remember to always follow the manufacturer’s guidelines and recommendations when using advanced features like line lock to ensure safety and proper functionality.

How to do line-lock with tazer on charger?

Plus. Button here for cruise. Control when you do that will pop up you can let go of that as soon as you press it but you do need to continue holding. Down this left arrow.

How to do a burnout with line lock?

Right get the rear tire spinning. Before you come off the throttle make sure you come off the okay. Button let the car continue to burn out for about four feet and then prepare yourself for.

Can I use a line lock as a parking brake?

These line locks perform as operational parking brakes only such as a dump-truck stopped to dump a load. Line Locks are not intended for prolonged “unattended” parking. Thus, this is not the optimal parking brake solution.

How do you use the line lock on a Dodge Challenger?

Down to about 2,000 psi. And you’re holding okay. Now I’m letting go with a brake. And applying throttle. There we go so easy to do line lot and now we’re gonna go into launch control.

How do I activate line-lock?

Hold down the OK button initialize. And complete hold down the brake. And then press ok. Now let’s give it some. Gas. Now that was pretty cool let’s go and check it out through the slow-mo.

How do you use a line lock on a scat pack?

Down to about 2,000 psi. And you’re holding okay. Now I’m letting go with a brake. And applying throttle. There we go so easy to do line lot and now we’re gonna go into launch control.

How does a line locker work?

The activated line-lock closes off the brake circuit and locks the wheels at the vehicle’s non-drive-end. The locked wheels hold the vehicle stationary in the burnout box so that the drive wheels can achieve the perfect burnout, warm, the tires, and not burn up the brakes on the driven wheels.

What is line-lock on Dodge?

Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal. This makes the rear tires spin but keeps the car stationary.

Can you put line lock on rear brakes?

Yes, you plumb it to stop the pressure to the rear brakes. You then apply power to the Line Lock Solenoid before you step on the brakes. It will allow the rear brakes to “Float” and you have control over the fronts with the pedal.

How to do a burnout in a Dodge Charger?

So I’m gonna help you guys out. So what you’re gonna do is come over here to your track control button right here. Hold that bad boy down for five seconds. Boom you get the message pops up there.