AHG Auto Service » Make » Toyota » How do you use the back windshield wipers on a Toyota Prius?

How do you use the back windshield wipers on a Toyota Prius?

Using the Back Windshield Wipers on a Toyota Prius
To use the back windshield wipers on a Toyota Prius, you can follow these steps:
1. Locate the wiper controls: The controls for the windshield wipers are typically located on the right-hand side of the steering column.
2. Activate the rear wipers: To activate the rear windshield wipers, you will need to use the control stalk on the right-hand side of the steering column. Here’s how you can use it:
– Move the control stalk down one position to select the intermittent setting for the rear wipers. This setting will cause the rear wipers to wipe the windshield at regular intervals.
– Move the control stalk down one more position to select a slow and constant wiper mode for the rear wipers. In this mode, the rear wipers will wipe the windshield at a slower speed continuously.
– Move the control stalk down one more time to select the fast wiper mode for the rear wipers. This mode will cause the rear wipers to wipe the windshield at a faster speed continuously.
– To activate the windshield washers for the rear window, pull the entire control stalk towards you.
Please note that the specific location and operation of the wiper controls may vary slightly depending on the model year of your Toyota Prius. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions specific to your vehicle.
Source:
– Source : ‘How to Operate the windshield wipers in a 2010 Prius Driving…’

Where is rear wiper switch?

The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles.

How do back windshield wipers work?

Turn the dial as far backward as it can go to turn the wipers off completely to wash your windshield. Press the button at the end of the stock.

Why won’t my back window wiper work?

There are different reasons this could have happened – the first thing to check is the fuse for the rear wiper .. If the fuse has blown , replace it and see if its then ok – What can happen is that the wiper gets used very little so when it is used, it can stick a bit -causing excessive amps draw – and blows the fuse.

How do you use the rear windshield wiper on a Prius?

At the second stop it runs continuously. Twisting it beyond the second stop activates the washer to wash the rear window without leaving the wipers on twist.

Why is my rear wiper not working?

There are different reasons this could have happened – the first thing to check is the fuse for the rear wiper .. If the fuse has blown , replace it and see if its then ok – What can happen is that the wiper gets used very little so when it is used, it can stick a bit -causing excessive amps draw – and blows the fuse.

Why is my back windshield wiper not working?

There are a number of reasons why windscreen wipers stop working and these include: torn wipers, broken controls, a blown fuse, faults with the motor, damaged arms, snow or ice covering, loose pivot nuts and a break in the wires. Torn wipers – wiper blades are comprised of plastic with rubber attachments.

How do you turn on windshield wipers on a Toyota?

And adjust the interval setting by rotating up for more frequent wipes. Or down for fewer wipes push the stock further down for continuous low-speed wiping.

How do you turn on the rear windshield wiper on a Toyota?

Okay so now to activate your rear wipers you have it in off position here you have your intermittent here. And you’re on there and that turns your back wipers. On.

Where are the windshield wipers on a Prius?

And then get it free and that’s what the windshield. Wiper. Looks like 19 and 26 inches are the sizes of the wipers link in description pop open the retainer on the new one pop it into. Place.

How do you activate the back windshield wiper?

If you see the symbol on the dashboard, push a button to control the back wipers. You can usually find the rear windshield wipers dial to the left of the main windshield wipers dial. In other cars, the back windshield wiper controls might be a push button on the end of the control stalk.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment