How do you use cruise control on a Dodge Journey?

To use cruise control on a Dodge Journey, follow these steps:
1. Locate the cruise control lever: The cruise control lever is located on the right side of the steering wheel.
2. Activate the cruise control system: Push and release the ON/OFF button at the end of the speed control lever. The Cruise Indicator Light will illuminate in the instrument cluster.
3. Set the desired speed: With the cruise control on, push down and release the lever to select the desired speed. The set speed will be saved.
4. Accelerate or decelerate: To accelerate, push and hold the lever up. To decelerate, push and hold the lever down. Release the lever to save the new set speed. You can also tap the lever up or down to increase or decrease the speed by one mph.
5. Cancel the cruise control: To cancel the cruise control, pull the lever toward you or apply the brakes. This will deactivate the set speed and maintain the speed in the vehicle’s memory.
Please note that if you are experiencing issues with the cruise control not working, it is recommended to have a mechanic check it to determine the nature of the problem .
I hope this helps! Let me know if you have any other questions.

How do I know if I have active cruise control?

When the system is turned on, you’ll see a white Adaptive Cruise Control icon in your cluster display or on your Head-Up Display, if your vehicle has that feature. The icon may look like a speedometer with a vehicle on top of it or an arc with a small triangle pointing through it.

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Why is my cruise control not working on my Dodge Journey?

The most common reasons a Dodge Journey cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.

Why wont my car let me use cruise control?

Since your car’s cruise control is part of an electrical system, it needs a fuse to function properly. A short circuit in this system can cause a fuse to blow, which means that the cruise control will suddenly stop working. Fortunately, replacing a blown fuse is a cheap and easy repair for any auto mechanic.

How do you drive in cruise mode?

The cruise control icon turns green and confirms the speed we have set. We can now lift our foot from the accelerator.

What is the most common failure of a cruise control system?

Examine the vacuum lines to ensure that they are intact and not leaking. The photo at the beginning of the article shows the most common failure of cruise control systems, vacuum hoses that are leaking or deteriorated to the point they will not stay attached to the cruise control servo.

How do you set cruise control on a Dodge Journey?

Take your foot off the accelerator. And the vehicle will cruise at the speed you’ve selected. To disengage the speed control depress the brake pedal.

How do you use cruise control on a Dodge?

Activating Cruise Control in A RAM

1. While driving, accelerate to the speed that you desire.
2. Push the “Set” cruise control button.
3. Take your foot off the accelerator. The vehicle will cruise at the set speed.

How do you set cruise control on a 2012 Dodge Journey?

And hold the set – button release. The button when the desired speed is tapping the set – button once will result in a one mile per hour speed decrease. Each time the button is tapped speed decreases.