How do you use cruise control on a Dodge Durango?

Using Cruise Control on a Dodge Durango
To use cruise control on a Dodge Durango, you can follow these steps:
1. Activation: To activate the cruise control, first make sure your vehicle is traveling at the desired speed.
2. Engagement: Once at the desired speed, press the “ON” button located on the steering wheel or dashboard to engage the cruise control system.
3. Setting Speed: After engaging the system, use the “SET” button to set the desired speed. This will maintain the vehicle at a constant speed without the need to keep your foot on the accelerator pedal.
4. Adjusting Speed: To adjust the set speed, you can use the “+” or “-” buttons to increase or decrease the speed as needed.
5. Deactivation: To deactivate the cruise control, you can press the “CANCEL” button or simply tap the brake pedal.
The Dodge Durango also offers available Adaptive Cruise Control with Stop, which can automatically adjust to a pre-selected distance from the preceding vehicle using throttle control and limited braking, even coming to a complete stop if needed.
Remember to always refer to the specific instructions in your vehicle’s manual for the most accurate guidance on using the cruise control system.

How do you use cruise control on a Dodge?

Activating Cruise Control in A RAM

1. While driving, accelerate to the speed that you desire.
2. Push the “Set” cruise control button.
3. Take your foot off the accelerator. The vehicle will cruise at the set speed.

How do I know if my cruise control is on?

Switch on cruise control: Once you reach your desired speed (making sure it’s within the speed limit), turn on the cruise control system. In most vehicles, the buttons that control it appear on or behind the steering wheel, and a light will appear on your dashboard once it’s turned on.

Where is the cruise control located?

Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board. Here are the basic buttons you can use to operate cruise control.

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

How to switch between adaptive cruise control and regular cruise control?

SWITCHING BETWEEN CRUISE CONTROL MODES

1. Press and hold the Cancel button.
2. After a brief time, the icon in the cluster will switch modes.
3. You’ll see a message in your cluster display that you have switched between cruise control and Adaptive Cruise Control.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

Does Dodge Durango have cruise control?

CRUISE WITH CONFIDENCE
For any levels of traffic, Durango offers available Adaptive Cruise Control with Stop 1 that can automatically adjust to a pre-selected distance from the preceding vehicle using throttle control and limited braking—even coming to a complete stop if needed.

Can you use cruise control while driving?

Only use your cruise control when the roadways are dry and clean, and never during rainy or icy conditions. Also, never use cruise control in city or congested traffic as the decreased control of your vehicle could contribute to an accident.

How do I turn on adaptive cruise control in Durango?

Then push and release the set Plus or set minus button to set the speed. Take your foot off the accelerator. And the vehicle will cruise at the speed you’ve selected.