To use cruise control on a Chevy Equinox, follow these steps:
1. Enable Cruise Control:
– On the left side of your steering wheel, you will find the Cruise Control buttons.
– Press the TOP of the button to turn the system ON.
– You will see a WHITE icon pop up in the cluster, indicating that Cruise Control is on.
2. Set Your Speed:
– Press the middle RES/+ button down to set your desired speed.
– The white icon will turn GREEN, indicating that Cruise Control is set and active.
– You can now take your foot off the accelerator and let the vehicle maintain the set speed.
3. Disengaging Cruise Control:
– Cruise Control will automatically disengage if you apply the brakes.
– If the vehicle has the StabiliTrak system and begins to limit wheel spin while using cruise control, the cruise control will also automatically disengage. Once road conditions allow, you can turn cruise control back on.
Please note that cruise control should not be used on winding roads, in heavy traffic, or on wet, slippery, or icy roads, as it can be dangerous in these conditions.
Remember to always refer to your vehicle’s owner’s manual for specific instructions and guidelines on using cruise control in your Chevy Equinox.
Contents
- What does the cruise control icon look like?
- How do I activate cruise control?
- What does LT mean on Equinox LT?
- How does basic cruise control work?
- Where are cruise control buttons?
- Why is the cruise control not working on my Chevy Equinox?
- Where is the switch for cruise control?
- How do you turn on cruise control on an Equinox?
- How do you use cruise control on a Chevy?
- How do I know if I have active cruise control?
What does the cruise control icon look like?
The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.
How do I activate cruise control?
To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.
What does LT mean on Equinox LT?
The LT stands for “luxury touring” and signifies models that are above the LS entry-level trims. Some popular Chevy models with LS trims include: Chevy Trailblazer. Chevy Trax. Chevy Equinox.
How does basic cruise control work?
Cruise control is a feature that helps reduce such fatigue drivers would feel while driving a long distance. The system imitates the way human drivers drive. But instead of pressing the accelerator pedal, it uses an actuator to control the throttle and helps your car continue cruising at the same speed.
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board. Here are the basic buttons you can use to operate cruise control.
Why is the cruise control not working on my Chevy Equinox?
The most common reasons a Chevrolet Equinox cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.
Where is the switch for cruise control?
Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.
How do you turn on cruise control on an Equinox?
So the four pads. And then the four buttons. I should send on the one in the middle. So the one on the right hand side. That’s going to be four years so that essentially turns the system on.
How do you use cruise control on a Chevy?
But we want to show you how to use adaptive cruise control. So I’m going to turn it back on and we’re going to hit the road. Let’s Roll check this out we got adaptive cruise control set.
How do I know if I have active cruise control?
When the system is turned on, you’ll see a white Adaptive Cruise Control icon in your cluster display or on your Head-Up Display, if your vehicle has that feature. The icon may look like a speedometer with a vehicle on top of it or an arc with a small triangle pointing through it.