How do you use a Ford fan clutch removal tool?

To use a Ford fan clutch removal tool, follow these steps:
1. Prepare the necessary tools: You will need a fan clutch removal tool, which can be purchased from retailers like Amazon. Make sure you have the correct size tool for your specific Ford model.
2. Access the fan clutch: Remove the fan shroud if necessary. This may involve removing bolts or clips that secure the shroud in place.
3. Secure the pulley: Use a tool to lock the pulley from moving. This will prevent the pulley from rotating while you loosen the fan clutch nut.
4. Loosen the fan clutch nut: Place the fan clutch removal tool over the fan clutch nut. Ensure that the tool is securely in place. Apply force in the appropriate direction to loosen the nut. If the tool slips on the nuts, you can try turning it over or pinching the two portions of the tool together with your hand.
5. Remove the fan clutch: Once the nut is loosened, you can remove the fan clutch from the engine. Carefully lift the fan clutch out, making sure not to damage any surrounding components.
Remember to consult your vehicle’s manual for specific instructions and safety precautions. If you are unsure or uncomfortable performing this task yourself, it is recommended to seek assistance from a professional mechanic.
I hope this helps! Let me know if you have any other questions.

How do I know if my fan clutch is locked up?

A bit obvious, but make sure to check the engine management system on your vehicle before anything else. A noisy, constant droning noise from the fan. A locked-in, or seized, fan clutch can cause radiator fans to fully engage at all speeds.

How do you remove a radiator fan without a tool?

And just tap down on top of the wrench and then that should shock it. Off. Of course while pushing on the wrench to rotate. It clockwise and there we go. That’s the fan clutch loose.

What size wrench for Ford 4.9 fan clutch?

Fan clutches can be a hassle to remove when you don’t have the appropriately size clutch wrenches. These clutch wrenches are 36 MM and 57 MM in width giving you the perfect size for work on Fords.

What tools do you need to remove a fan clutch?

The fan clutch wrench fits over the large nut, then a long metal shaft fitted to an impact hammer slides into the slot. One short pull of the trigger is often enough to loosen the nut. For some manually operated fan clutch removal tools, a spanner that holds the water pump pulley in place comes with the kit.

How do you remove a Ford clutch fan?

The fan that is quite sizable. So with the just pull right on the fan out we can begin striking it downward. There we go came loose. Now we can remove our pipe wrench. Here.

What is a fan clutch holding tool?

The OEM tools Fan Clutch Holding Tool is designed to hold the water pump pulley in place to remove the fan clutch. Place the holding tool around the water pump pulley retaining bolts. Depending on the vehicle, you can use the hooks to engage the retaining bolts, or you can use the holes located on the jaws of the tool.

Which way do you loosen a fan clutch nut?

So in order to do that it needs to spin this way. Right. So whatever way the fan needs to spin. That’s the way you hit it to loosen that nut so you can remove the fan so Fan’s been in this way.

What size is the fan clutch nut?

The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8″ (22 mm), 1 7/16″ (36 mm), 1 9/16″ (39 mm), 1 7/8″ (47 mm) and 2″ (50 mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts. Made of heat treated alloy steel to provide strength.

How to remove clutch fan on 97 Ford f150?

Make sure you don’t drop it though so be careful as you do this. Okay here we go and you can pull the Shroud. And the fan up at the same. Time. I’m going to go ahead and close my petcock.

What tools do you need to take off a fan blade?

Most fan blades attach via two screws near the motor and fan housing. Use a screwdriver to remove a single fan blade. Make sure you keep the screws in a safe place.