How do you unlock a Subaru trunk?

How to Unlock a Subaru Trunk
To unlock a Subaru trunk, there are several methods available depending on the specific model and features of the vehicle:
1. Using Pin Code Access: On newer Subaru Forester, Outback, Crosstrek, WRX, Impreza, and Legacy models with Subaru Starlink Safety and Security, you can program a five-digit code using the lock button in your trunk or lift-gate. After locking your Subaru, you can unlock the driver’s side door by entering the five-digit code you set on the trunk release or lift gate lock button.
2. Using the Internal Handle: If the trunk won’t open automatically or you are stuck and can only exit through the vehicle’s rear, there is a small plastic cover at the center of the tailgate on the bottom of the trunk hatch. Removing the plastic cover will reveal the lock, and there is a lever on the lock which, when activated, will unlock the trunk.
3. Manually Opening the Trunk: If the key fob and the power liftgate won’t unlock the trunk, you can manually unlock the trunk from the inside by accessing the trunk, removing the panel at the bottom center of the trunk that covers the rear gate lock release handle, and using a flathead screwdriver to turn the lever to the right to open the trunk.
4. Using the Key Fob: If you have the key fob on your person, you can manually open the Subaru Outback hatch without having to press a button on the key. First, unlock your car manually from the driver’s side door, then press the button underneath the Subaru emblem on your trunk to open it.
5. Other Methods: There are additional methods, such as using the remote keyless entry system or pressing the trunk button on the key-less remote.
It’s important to note that the specific method to use may depend on the model and features of the Subaru vehicle. If you encounter difficulties, it’s recommended to consult the vehicle’s user manual or contact the dealership for assistance.

How do you open the trunk of a car from the inside?

Depending on the vehicle, you may have a button or manual lever inside the cabin that can pop the trunk, possibly even inside the glovebox. Look for a pull-up lever on the floor to the left of the driver’s seat. Some vehicles also have hidden trunk-release latches behind the seats, or in the doors or armrests.

How do you open the back door on a Subaru?

Open you can also press the lock button on the rear gate to simultaneously. Close the rear gate and lock your subaru.

Where is the emergency trunk release?

The emergency trunk release is typically located near your trunk latch, meaning it’s close to the lip of your trunk’s lid. Many modern emergency trunk releases are made to be glow-in-the-dark and easy to find. It’s smart to check your own trunk to see if it has one and make sure you know where it is.

Why wont my Subaru trunk open?

If you hold the button on the hatch itself for several seconds, it’ll beep and reset itself. If that doesn’t work, dealer may have to look at it. Make sure you press the door unlock button on the driver’s side door before doing the long press on the hatch button on the dash.

How do you open a trunk without a remote?

Although it’s unlikely that you’ll need the emergency release. In this circumstance. It’s still a good idea to be aware that it is a possibility.

Do all cars have inside trunk release?

All American cars made after 2002 are required to have a trunk release inside the trunk, thanks to a national law. If you’re lucky enough to be in one of these cars, and your abductor was dumb enough to overlook it, find the release and pull it down or up, as the model may require.

How do you open the trunk on a 2017 Subaru Outback?

The handle is located on the inside of the trunk lid . To open the trunk lid from inside the trunk , pull the yellow handle as indicated by the arrow on the handle . This operation unlocks the trunk lid . Then , push up the lid .

How do you reset the rear hatch on a Subaru?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.

How do you manually open the trunk on a Subaru Legacy?

Press the trunk lid opener lock button. To unlock the trunk lid opener switch, perform the same procedure again. To open the trunk lid from inside the trunk, pull the yellow handle as indicated by the arrow on the handle. This operation unlocks the trunk lid.

How do you manually open a Subaru trunk?

So go ahead. And pull the top lever. Up we’ll go outside the vehicle. You can see that it’s open.