How do you turn on the high beam on a Subaru crosstrek?

To turn on the high beam on a Subaru Crosstrek, you can follow these steps:
1. Make sure your vehicle is in a safe and appropriate driving condition to use the high beam.
2. Locate the light control switch on the left side of the steering wheel column.
3. Push the light control switch forward to the ” ” position. This will activate the high beam headlights.
4. The high beam headlights will remain on as long as the light control switch is in the ” ” position.
Please note that the availability and functionality of the high beam assist feature may vary depending on the specific model year and trim level of your Subaru Crosstrek. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions specific to your vehicle.
Source:
–

How do you turn on high or low beams?

It you can manually turn the exterior lights off when the power is on and the vehicle is in park. And or the parking brake is applied rotate the end of the lever to the off.

Does Subaru have automatic high beams?

Your hands stay on the steering wheel while using High Beam Assist. You’ll see better, and drive more safely without having to constantly adjust your lights. Better yet – you won’t forget to adjust your lights – which means a better drive for you AND for the other drivers on the road.

Which button is high beam?

There is the signal lever right here so once again with the signals. You can move it up and down to turn the signals on and off then back in the middle just like that. But to use the high beams.

What is the high beam symbol?

The high beam symbol is a blue symbol with five horizontal lines vertically stacked to the left of a shape that resembles a headlight. This will engage on the dashboard to notify you that your high beam lights are active. Once the high beams have been turned off, this symbol will turn off as well.

Why won t my high beams turn on?

Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don’t work or low beams don’t work. The cause: A burned out bulb, or a problem with the high beam switch or relay.

How do you turn on a high beam Subaru?

If you switch the headlights from Auto to On, the high beams will be controlled manually. If you want High Beam Assist to actually be disabled, that can be done using Subaru Select Monitor (Subaru dealer diagnostic software). pull back to disable the high beam mode and this will also disable auto high beam mode.

How do you turn on high beam assist?

Position. Then pull the light switch lever toward you and hold it for at least 40 seconds. The auto high beam indicator light will blink twice. And the feature will be disabled.

Which is high beam and which is low beam?

Tip: High beams are distinguished from low beams by their brighter light. They are sometimes referred to as “main beam” headlights. These terms are synonymous, and the term used depends entirely on the region. High beams point straight ahead, while low beams are angled down towards the road.

Which icon is for low beams?

The “low beam” symbol looks like a rounded triangle or capital letter “D.” Downward-slanted lines extend out from the flat side of the shape. The “fog light” symbol utilizes the same shape and has downward slanting lines like the “low beam” symbol.

What is Subaru high beam assist?

Or even moving in the same direction. It can automatically switch off your high beams to protect other drivers from the glare.