AHG Auto Service » Make » Subaru » How do you turn on the fog lights on a Subaru Legacy?

How do you turn on the fog lights on a Subaru Legacy?

To turn on the fog lights on a Subaru Legacy, follow these steps:
1. Locate the light switch on the instrument panel of your Subaru Legacy.
2. Turn the light switch to the ” ” or ” ” position. This will activate the fog lights.
Please note that not all Subaru Legacy models are equipped with fog lights from the factory. If your vehicle does not have factory-installed fog lights, you may need to install an aftermarket fog light kit.
I hope this helps! Let me know if you have any other questions.

How do you turn on fog lights?

Look near the headlight controls for the fog light symbol, which has 3 parallel horizontal lines going through a vertical wavy line. If the control is a button, press it down to turn on the fog lights. If the control has a switch or dial, turn it until it points at the fog light symbol.

Where is the fog light switch on a car?

They can usually be found on a button on the dashboard, on a steering wheel stalk, or next to the dial you use to control your regular lights.

Which button is my fog lights?

In older vehicles, it is common to find the fog light buttons on your indicator stick, to the left of your steering wheel. In newer vehicles, fog lights are generally controlled via a knob on the panel directly under an air conditioning vent. Using these buttons, you can turn on your fog lights.

Do fog lights always stay on?

In terms of your fog lights, the Code states that you should only use them when your visibility is seriously reduced (to 100 metres or less) and that they must be switched off when visibility improves.

Can I ride with my fog lights on?

In really dense fog, use front fog lights in addition to your low-beams if you have them. NEVER drive using only your parking or fog lights. It’s illegal and unsafe. Use rear fog lights if you have them when visibility is less than around 300 feet.

What is the symbol for fog lights?

The symbol for the front fog lights (if fitted) is an oval-shaped lamp with three diagonal lines intersected with a wavy vertical line to the left of it. The symbol for the rear fog lights is an oval-shaped lamp with three horizontal lines bisected by a wavy vertical line on its right.

Are fog lights supposed to be on?

When to use fog lights. Fog lights should be used when your visibility is less than 100 metres, roughly the length of a football pitch. They should also only be used when it’s actually foggy or there’s heavy mist, as the lights are very bright and can dazzle other drivers if used incorrectly.

Are fog lights automatic?

Fog lights are usually operated by a separate switch from the main light controls. Some cars use buttons to activate them – one for the rear, one for the front (where front fog lights are fitted) – while others feature a collar on the light stalk that you turn back and forth to turn them on.

What does the fog light button look like on a car?

You how to use fog lights on a car now fog lights are different from your regular headlights. And high beams fog lights are usually lower on the car with regards to where they sit on the front bumper.

When and how to use fog lights?

Fog lights should be used when your visibility is less than 100 metres, roughly the length of a football pitch. They should also only be used when it’s actually foggy or there’s heavy mist, as the lights are very bright and can dazzle other drivers if used incorrectly.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment