AHG Auto Service » Make » Subaru » How do you turn on the fog lights on a 2011 Subaru Outback?

How do you turn on the fog lights on a 2011 Subaru Outback?

To turn on the fog lights on a 2011 Subaru Outback, follow these steps:
1. Locate the headlight stalk (switch) on the left side of the steering column.
2. Look for a “ring” about a half inch to the inside of the headlight knob.
3. Turn the ring upward to the “on” position to activate the front fog lights.
4. The indicator light on the combination meter will illuminate when the front fog lights are on.
Please note that the base model of the 2011 Subaru Outback does not come equipped with fog lights. If your Outback does not have fog lights, you may consider purchasing a fog light kit specifically designed for the 2011 Outback model .
I hope this helps! Let me know if you have any other questions.

How do you turn on fog lights?

In most cars, they can be switched on using the same stalk as the headlights, or by a button on the dashboard. The symbol for fog lights can be seen on the rectangular switch in the picture above. If the wavy line is to the left of the lamp graphic, those are your front fog lights.

How do you turn on fog lights in Outback Wilderness?

Okay so as you guys just saw this side didn’t illuminate. So I had to take the bumper off again take the extension cable flip it around plug it back in. And now we’re going to try it.

Are fog lights automatic?

Fog lights are usually operated by a separate switch from the main light controls. Some cars use buttons to activate them – one for the rear, one for the front (where front fog lights are fitted) – while others feature a collar on the light stalk that you turn back and forth to turn them on.

Which icon is fog lights?

The symbol for the front fog lights (if fitted) is an oval-shaped lamp with three diagonal lines intersected with a wavy vertical line to the left of it. The symbol for the rear fog lights is an oval-shaped lamp with three horizontal lines bisected by a wavy vertical line on its right.

When and how to use fog lights?

Fog lights should be used when your visibility is less than 100 metres, roughly the length of a football pitch. They should also only be used when it’s actually foggy or there’s heavy mist, as the lights are very bright and can dazzle other drivers if used incorrectly.

Which button is my fog lights?

In older vehicles, it is common to find the fog light buttons on your indicator stick, to the left of your steering wheel. In newer vehicles, fog lights are generally controlled via a knob on the panel directly under an air conditioning vent. Using these buttons, you can turn on your fog lights.

How do I turn on my fog lights?

But the fog lights aren’t actually on because there’s a little bit more to it if it was that easy. You know then you just turn the lever. And that’s it they’re on now. In most cars.

Where is the fog light switch on?

Look near the headlight controls for the fog light symbol, which has 3 parallel horizontal lines going through a vertical wavy line. If the control is a button, press it down to turn on the fog lights. If the control has a switch or dial, turn it until it points at the fog light symbol.

What does the fog symbol look like?

The weather symbol that shows a cloud with three lines under means fog.

Are Subaru fog lights automatic?

Yes if the fog switch is turned on , it will automatically come on with your headlights on low.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment