Turning On the Blind Spot Monitor on a Chevy Suburban
To turn on the blind spot monitor on a Chevy Suburban, you can follow these steps:
1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button.
2. Press the Up/Down buttons until Driver Assist is displayed, then press the OK button.
3. Press the Up/Down buttons until Blind Spot is displayed, then press the OK button.
4. Select On.
The blind spot monitor system on the Chevy Suburban is designed to assist with lane changes by alerting you when a vehicle is in, or quickly approaching, the side blind zone. It provides visual alerts in the side mirrors when a moving vehicle is detected in the side blind zone.
This feature is part of the Lane Change Alert with Side Blind Zone Alert, and both features work together. It’s important to note that if you turn the feature off, it will stay off even after you shut down and start the vehicle again. To use Lane Change Alert with Side Blind Zone Alert again, you will need to go back into the menu to turn it back on.
For more information about the blind spot monitor feature on your specific vehicle, you can also contact your dealer or refer to your vehicle’s equipment list in the Owner’s Manual.
If you have any further questions or need more help, feel free to ask!
Contents
- Do Suburbans have blind-spot monitoring?
- Where is the blind spot indicator?
- How do I turn on my blind spot monitor?
- Why is my blind spot assist inoperative?
- Why did my blind spot detection turn off?
- How do I reset my service side detection system?
- Where is my blind spot sensor?
- How do I turn my BSM back on?
- How do I know if my car has blind-spot monitoring?
- Why aren’t my blind spot sensors working?
Do Suburbans have blind-spot monitoring?
2022 Chevrolet Suburban Safety Features
Some of these include blind-spot monitoring, surround parking camera, rearview mirror with integrated camera display, safety alert seat, adaptive cruise control, and head-up display.
Where is the blind spot indicator?
Most Blind Spot Warning systems use radar sensors, but some use cameras. The sensors are usually located under the rear bumper or side view mirrors. The sensors monitor the areas behind and next to your car. The detection area covers approximately one lane width on both sides of your car.
How do I turn on my blind spot monitor?
On. Now when you signal to turn left you’ll see the left side rear view of the road on your instrument cluster. You’ll see the other side when you signal. Right.
Why is my blind spot assist inoperative?
If the blind spot assist remains disabled, check fuses. If the fuse has not blown, check the blind spot sensor as it may need to be cleaned also check the connector on the sensor as it may be corroded.
Why did my blind spot detection turn off?
Since the blind spot stopped working on its own suddenly this can indicate a fault with one of the mirror sensors or a fault with the blind spot control module/ECU failing. Either one of these will create this sudden loss of the blind spot assist when nothing was done by you to turn it off.
How do I reset my service side detection system?
Many side detection systems are integrated with your vehicle’s computer, which means you can reset the dashboard light with an OBD2 scanner. Locate the OBD2 port under your steering wheel and insert an OBD2 scanner. Power the scanner on and look to see if there’s an error code for your side detection system.
Where is my blind spot sensor?
Most Blind Spot Warning systems use radar sensors, but some use cameras. The sensors are usually located under the rear bumper or side view mirrors. The sensors monitor the areas behind and next to your car. The detection area covers approximately one lane width on both sides of your car.
How do I turn my BSM back on?
Instead. If you look to the left you will see a button indicating BSM. If you push it and the green light is on it is now active. And once you push it.
How do I know if my car has blind-spot monitoring?
Warnings will appear in your sideview mirrors or in the windshield frame. Some advanced versions of this feature may give you an audible warning (or other type of warning) if you use your turn signal and there is a vehicle in your blind spot.
Why aren’t my blind spot sensors working?
Likewise, cars with blind spot monitors have several parts working together to detect vehicles. Sometimes, radars fail to see the surrounding objects. It can be a wiring problem or the wrong placement of radar sensors. In any case, it is wise to contact an expert and have a quick checkup.
