How do you turn on the blind spot monitor on a Chevy Malibu?

To turn on the blind spot monitor on a Chevy Malibu, you need to follow these steps:
1. Press the Up/Down buttons on the steering wheel until “Settings” is displayed on the instrument panel, then press the OK button.
2. Press the Up/Down buttons until “Driver Assist” is displayed, then press the OK button.
3. Press the Up/Down buttons until “Blind Spot” is displayed, then press the OK button.
4. Select “On” to turn on the blind spot monitor.
Please note that the blind spot monitor and lane change alert are two parts of one feature that work together. You can turn both of these features off together, but you can’t turn one feature on or off by itself. If you turn the feature off, it will stay off even after you shut down and start the vehicle again. To use Lane Change Alert with Side Blind Zone Alert again, you need to go back into the menu to turn it back on.
I hope this helps! Let me know if you have any other questions.

Why did my blind spot detection turn off?

Since the blind spot stopped working on its own suddenly this can indicate a fault with one of the mirror sensors or a fault with the blind spot control module/ECU failing. Either one of these will create this sudden loss of the blind spot assist when nothing was done by you to turn it off.

Does Chevy have blind-spot monitoring?

Side Blind Zone Alert alerts you if there’s a vehicle currently in your blind zone, and Lane Change Alert alerts you to fast-approaching vehicles that will soon enter your blind zone. When you start your vehicle, you’ll see both sideview mirror alerts briefly come on — this tells you the system is working.

Does Chevy Malibu have blind spot monitor?

The Malibu’s other advanced safety features available for the 2024 model year include highly regarded features like rear cross-traffic alert and blind spot monitoring. These features alert you to objects or other vehicles behind the Malibu that might be in your blind spot.

Why is my BSM light on?

The BSM warning indicator lights are equipped on the left and right door mirrors. The warning indicator lights turn on when a vehicle approaching from the rear in an adjacent lane is detected. When the ignition is switched ON, the warning indicator light turns on momentarily and then turns off after a few seconds.

Why are my blind spot sensors not working?

You should look for any signs of damage, dirt, or obstruction that may interfere with the sensor performance. You should also check the wiring and connectors for any loose or corroded contacts. If you find any problems with the sensors, you should clean them, repair them, or replace them as needed.

How do I reset my side detection system?

Many side detection systems are integrated with your vehicle’s computer, which means you can reset the dashboard light with an OBD2 scanner. Locate the OBD2 port under your steering wheel and insert an OBD2 scanner. Power the scanner on and look to see if there’s an error code for your side detection system.

How do I turn on my blind spot monitor?

On. Now when you signal to turn left you’ll see the left side rear view of the road on your instrument cluster. You’ll see the other side when you signal. Right.

How do I turn my BSM back on?

Instead. If you look to the left you will see a button indicating BSM. If you push it and the green light is on it is now active. And once you push it.

What is the blind-spot monitoring symbol?

An amber warning symbol will light up on the sideview mirror on the side where the system has detected the vehicle. If you turn on your turn signal in that direction, this warning symbol will flash as an extra warning to not change lanes.

Do you need to program blind spot monitor?

Programming will be required on many blind spot sensors, followed by an aiming procedure. There are many different procedures to aim the sensors.