How do you turn on rain sensing wipers on a Subaru Outback?

How to Turn On Rain Sensing Wipers on a Subaru Outback
To turn on the rain-sensing wipers on a Subaru Outback, you need to follow a few simple steps:
1. Make sure that the windshield wiper lever is in the “off” position.
2. Turn the vehicle’s ignition to the “on” position.
3. Locate the windshield wiper control stalk on the right side of the steering column.
4. Push the control stalk up one notch to the “AUTO” position. This will activate the rain-sensing feature.
5. Once activated, the wipers will automatically adjust their speed based on the intensity of the rain.
It is important to note that the rain-sensing feature is not a substitute for responsible driving. While it can help to improve visibility in inclement weather, it is still up to the driver to exercise caution and adjust their driving habits accordingly.
Please consult your owner’s manual for specific instructions on activating the rain-sensing wipers, as some Subaru models may have slightly different procedures.

How do I turn on my auto rain sensor?

System. Then click settings. Select safety and driving assistance scroll down toggle rain sensing Auto wipers on or off depending if we want them enabled or disabled. And there you have it.

How do you turn on auto rain-sensing wipers?

And when the stock is pushed all the way down high speed wiping is engaged to use the windshield washer. Pull back on the stock.

Where is the sensor located for the rain sensing wipers?

Rain-sensing windshield wipers use an infrared sensor located near the rearview mirror that detects moisture on the windshield. It activates the wipers to help increase driver visibility.

Does the Subaru Outback have rain-sensing wipers?

Standard driver assistance technologies include a rearview camera system, advanced adaptive cruise control, automatic emergency braking, automatic headlamps and high beams and rain-sensing windshield wipers.

Do Subarus have rain-sensing wipers?

And then you’ve got auto which is essentially one step down so you go to auto it’s gonna go once. And now it’s not gonna go again. And you’ll see that it does it for a little bit.

Why are my automatic wipers not working?

Look for recent cracks, chips, nicks, or warping. Study the area where the rain sensor is located. There can be no cracks or chips in that place. If you find chips or cracks, particularly in the area above the sensor, you will need to repair the crack or replace the windshield.

How do I know if my windshield has a rain sensor?

The difference between a rain sensor windshield and a standard windshield is that there is a small area (usually behind the rear view mirror) that is blackened out to hide the device. The dark area has a small view port with no tint or shading that allows the sensor to operate.

How do you use rain-sensing wipers on a Subaru?

Hold the whole stock towards you to wash your windshield. Now on the Outback. I have a legacy here so you won’t be able to see this but the Outback we twist. So you go up a notch for intermittent.

How do you test rain sensing wipers?

The function of the rain sensor can be easily tested by simulating precipitation on the windscreen.

1. Switch on the ignition.
2. Change wiper switch to automatic intermittent wiper control.
3. Use an aerosol to spray water onto sensor area on windshield.

How do I turn on rain-sensing?

RAINSENSE OPERATION. Move the windshield wiper lever to AUTO. The Driver Information Center will display that Rainsense is enabled. Turn the Rainsense sensitivity band UP for more sensitivity to moisture.