How do you turn on low beams on a Dodge Journey?

Turning on Low Beams on a Dodge Journey
To turn on the low beams on a Dodge Journey, you can follow these steps:
1. Locate the Headlight Switch: The headlight switch in the Dodge Journey is typically located on the dashboard.
2. Turn the Headlight Switch: To turn on the low beams, you need to turn the headlight switch to the appropriate position. This will activate the low beam headlights.
It’s important to ensure that the low beams are properly adjusted for optimal visibility and safety while driving at night. If you feel that the low beams are not lighting up well or are too low or too strong, it may be necessary to adjust them.
For a more detailed guide on adjusting the low beams of your Dodge Journey, you can refer to the owner’s manual or seek assistance from a qualified technician.

How do you switch from high beams to low beams?

You may need to either push or pull the control switch to the position indicated by the high beam symbol. A light on the dashboard will confirm that your high beams are engaged. Deactivate the high beams. To switch back to low beams, simply push or pull the control switch again.

What is the symbol for low beam?

The “low beam” symbol looks like a rounded triangle or capital letter “D.” Downward-slanted lines extend out from the flat side of the shape. The “fog light” symbol utilizes the same shape and has downward slanting lines like the “low beam” symbol.

Which light is low beam?

Low beams are angled towards the road and must always be on at night or in low-light settings such as tunnels. High beams are angled upwards for extra light and should only be used in very dark areas when there is no oncoming traffic so as to not blind other drivers.

Why is my low beam not working?

Headlight Fuse or Relay
If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.

How do I turn on my low beams?

Now point your switch to the low beam symbol to activate. Them if you’ve done it correctly this dashboard. Light should be visible on your car’s. Dashboard.

How do you turn on low and high beam headlights?

It you can manually turn the exterior lights off when the power is on and the vehicle is in park. And or the parking brake is applied rotate the end of the lever to the off.

Why aren t my low beams turning on?

Headlight Fuse or Relay
If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.

How do you turn on high and low beams?

Forward until you hear a click to return to low beams return the lever to the home. Position to flash the high beams pull the lever back and then release. It you can manually turn the exterior lights

How do you turn on high beams on a 2015 Dodge Journey?

For headlight selection push the multi-function. Lever away from you to switch the headlights to high beam. Pull the multi-function lever toward you to switch the headlights back to low beam.

Which is high beam and which is low beam?

Low beams are lower intensity and reach a shorter distance in front of your car. High beams are high intensity and light a greater distance.