AHG Auto Service » Make » Chevrolet » How do you turn on high beams in a Chevy Trax?

How do you turn on high beams in a Chevy Trax?

To turn on the high beams in a Chevy Trax, you can follow these steps:
Using the Headlight Switch:
1. Push the Turn Signal Switch Forward: Push the turn signal switch forward to change from low beams to high beams.
2. Pull the Switch Back: Pull the switch back toward you to change from high beams to low beams.
Using IntelliBeam (If Equipped):
If your Chevy Trax is equipped with IntelliBeam, it can automatically detect lighting conditions and other vehicles, turning the high beams on and off as needed, depending on vehicle speed. The high beam headlamps remain on until the system detects an approaching vehicle’s headlamps, another vehicle’s taillamps in front of you, bright enough exterior lighting, the vehicle’s speed dropping below 12 mph, or the turn signal lever being moved forward to the high beam position or the Flash-to-Pass feature being used.
It’s important to note that IntelliBeam will only turn the high beams on at speeds above 25 mph and can be disabled by the High/Low-Beam Changer or the Flash-to-Pass feature. If disabled, the High/Low-Beam Changer must be activated two times within five seconds to reactivate the IntelliBeam system.
If you encounter any issues with the high beams not working, it’s recommended to check the headlight bulbs and sockets, as issues with these components can affect the functionality of the low and high beams.
Remember, always ensure that you use high beams responsibly, especially in the presence of other vehicles, to avoid causing discomfort or glare to other drivers.

How do you turn off high beams on a Chevy?

I absolutely love that because with most automobiles. You have to turn it on each and every time you hop into the car. Absolutely love that one feature. With. The Chevy Equinox.

How do you turn on the brights on a Chevy Trax?

a. On these vehicles, select the Virtual Controls app, then tap Lights and turn Auto High Beams on to engage IntelliBeam.

How do you switch between high and low beams?

It you can manually turn the exterior lights off when the power is on and the vehicle is in park. And or the parking brake is applied rotate the end of the lever to the off.

Which button is high beam?

This setting is usually on a stick on the steering column, sometimes the stick that controls your turn signal, and is always separate from the low beam control. The high beams can be turned on by pushing or pulling on the turn signal lever forwards or backwards.

How do you turn on Chevy Intellibeam headlights?

So let’s go through and show you how to do. That. First things first this will only work if you are in the auto position. Or in the headlight. On position the headlights actually have to be on.

How do you turn off and on high beams?

The high beams can be turned on by pushing or pulling on the turn signal lever forwards or backwards. These lights are more intense and create a greater amount of road glare, so you should only use them when other cars are not present or nearby.

How do you turn on your high beams?

There is the signal lever right here so once again with the signals. You can move it up and down to turn the signals on and off then back in the middle just like that. But to use the high beams.

How do I know if my high beams are on?

It’s pretty simple to know if your high beams are activated, and motorists can do so by looking at the instrument cluster (usually situated around the speedometer area) for a blue headlight icon.

Why won t my high beams turn on?

Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don’t work or low beams don’t work. The cause: A burned out bulb, or a problem with the high beam switch or relay.

How do I know if my brights are on?

It’s pretty simple to know if your high beams are activated, and motorists can do so by looking at the instrument cluster (usually situated around the speedometer area) for a blue headlight icon.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment