To turn on the daytime running lights on a Chevy Silverado, you can follow these steps:
Method 1: Using the Unlock/Lock Button
– When you push the unlock/lock button, the daytime running lights turn on and stay on for roughly a minute.
Method 2: Using the Headlight Switch Button
– If you hit the headlight switch button four times on some models, it turns off the daytime running lights.
Method 3: Using the Light Selection Rotary Knob
– The headlights will be turned off if you spin the light selection rotary knob completely counterclockwise (found on the bottom LH side of the dash) and then release it to its usual position one time.
Additional Information
– The daytime running lights will automatically turn on when the vehicle’s engine is running and will only turn off or dim when the headlights are switched on.
These methods should help you turn on the daytime running lights on your Chevy Silverado.
Contents
- What is the icon for daytime running lights?
- How do you turn off daytime running lights on a Chevy Silverado?
- How do I activate DRL?
- What controls daytime running lights?
- Where is the daytime running light module located on a Chevy?
- What causes daytime running lights not working?
- Do daytime running lights come on automatically?
- Are daytime running lights automatic?
- How do I turn the daytime running lights?
- Do I need to turn on daytime running lights?
What is the icon for daytime running lights?
Daytime Running Lights Indicator – This light is shown as “DRL” on your dashboard and is a safety feature for driving your car during the day. If you notice the light is blinking, make sure to turn off any lights so you don’t drain the battery. Immobilizer System – This light is usually green and in the shape of a key.
How do you turn off daytime running lights on a Chevy Silverado?
Times. Now see your daytime lights are off nothing shining on the wall. And then you can press it one two three more times and they come back on. So here’s that switch.
How do I activate DRL?
Also. When you switch to headlights. Or side lights they will go off all other lights automatically.
What controls daytime running lights?
DRLs operate all on their own. They illuminate when you engage the ignition and extinguish when the headlights activate. The driver has no real control over operating DRLs because there is no DRL on-off switch.
Where is the daytime running light module located on a Chevy?
Right here in the back. So here’s your emergency brake assembly. Right here there’s the pedal. There’s the piece that it mounts onto.
What causes daytime running lights not working?
This is usually caused by a cracked, worn, or damaged wire in the wiring harness. Another common issue is a blown fuse for the daytime running lamps, which can be easily replaced with a new one. Finally, a defective DRL relay can also cause issues with the DRL warning light and should be replaced if necessary.
Do daytime running lights come on automatically?
DRLs are low-intensity headlights that automatically turn on when the vehicle is in motion. They differ from regular headlights, usually manually turned on at night or in low-light conditions. DRLs are typically mounted in front of the vehicle to provide maximum visibility.
Are daytime running lights automatic?
DRLs are low-intensity headlights that automatically turn on when the vehicle is in motion. They differ from regular headlights, usually manually turned on at night or in low-light conditions. DRLs are typically mounted in front of the vehicle to provide maximum visibility.
How do I turn the daytime running lights?
Now. Now we don’t want some heat and stuff like that of course we want to turn it back on to stay warm. Let’s turn it back. On. So now parking brakes enabled.
Do I need to turn on daytime running lights?
DRLs switch on automatically when a car is started, and switch off when you turn on your headlights or turn off the car. Front-facing DRLs are required by law, however, rear-facing ones are not.
