How do you turn on cruise control on a Honda Pilot?

To turn on cruise control on a Honda Pilot, you can follow these steps:
1. Make sure the cruise control button on the dash, located by your left knee, is turned on. When the button is on, a little green light should be illuminated on the button.
2. Once the cruise control button is turned on, you can use the cruise control buttons on the steering wheel to set and adjust your desired speed. These buttons are typically located on the right side of the steering wheel.
3. Accelerate to your desired cruising speed above 25 mph (40 km/h).
4. Press the “SET/+” button on the steering wheel to set the speed. The CRUISE CONTROL light on the instrument panel will come on to indicate that the system is activated.
5. The Honda Pilot’s Adaptive Cruise Control (ACC) system will now maintain your set speed and adjust the following distance between your vehicle and the vehicle detected ahead.
To turn off cruise control, you have a few options:
1. Press the CANCEL button on the steering wheel.
2. Press the MAIN button on the steering wheel.
3. Tap or step on the brake pedal.
Remember to use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration.
Please note that the specific steps may vary slightly depending on the model year of your Honda Pilot. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions tailored to your specific model.

Where is the cruise main button located?

steering wheel
Turning the cruise-control system on — generally via a button on the steering wheel — causes the Cruise Main message to display on the dashboard. This doesn’t mean that you can now take your foot off the accelerator pedal. It means the system has been activated and is ready to have its speed set.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

How do I activate cruise control on my Honda?

Press the ACC button on the steering wheel. The white ACC icon will become illuminated on your Driver Information Interface (DII). Set your cruise speed by pressing the “RES/+” or SET/-“. If your current speed is below 25mph then it will automatically set to 25mph.

How do I activate cruise mode?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

How do you use cruise on Honda?

Press RES/ACCEL and hold it down. Once you reach cruising speed, you can release the button. Step on the accelerator pedal. When you’ve reached the speed you want, press the DECEL/SET button.

What is cruise mode on Honda Pilot?

And a windshield mounted. Camera to gauge the distance of a detected vehicle ahead ACC. Then sets the appropriate throttle position and can even apply braking to maintain a preferred.

How do you start cruise control on a Honda Pilot?

Press and hold the Interval button for one second. Cruise Mode Selected appears in the driver information interface for two seconds, and then the mode switches to Cruise. Press and hold the interval button for one second to switch back to ACC with Low Speed Follow.

How do you use cruise on a Honda?

You can control cruise control by pressing the Cruise Control Master Button on the steering wheel. On the instrument panel, a light displays CRUISE MAIN. It is desirable to cruise at a speed greater than 25 miles per hour (40 KPH). DECEL/SET buttons are located on the steering wheel.

What does the cruise control icon look like?

The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.

How do you toggle cruise control?

And then you want to resume cruising. At 70 all you do is you just press the accelerator. The car will accelerate. And when you let off of the accelerator.