AHG Auto Service » Make » Honda » How do you turn on cruise control on a Honda Passport?

How do you turn on cruise control on a Honda Passport?

To turn on cruise control on a Honda Passport, you can follow these steps:
1. Start by getting familiar with the controls on your Honda Passport’s steering wheel. Look for the buttons labeled “CRUISE” or “ACC” (Adaptive Cruise Control).
2. Once you’re on the open highway and at a safe speed, press the “CRUISE” or “ACC” button to activate the cruise control system.
3. Next, use the controls on the steering wheel to set your desired cruising speed. There should be buttons labeled “SET” or “RES” (Resume) that you can use to adjust the speed.
4. Honda Passport models equipped with Adaptive Cruise Control (ACC) also allow you to set the interval between your vehicle and the one detected ahead. This feature automatically adjusts your speed to maintain a safe distance. You can adjust the interval using the controls on the steering wheel.
5. To turn off cruise control, you can either press the “CANCEL” button on the steering wheel, press the “MAIN” button, or tap/step on the brake pedal. Please note that if your ACC system is equipped with Low-Speed Follow and has come to a complete stop, depressing the brake pedal will not turn off Adaptive Cruise Control.
Please keep in mind that the specific steps may vary slightly depending on the model year and trim level of your Honda Passport. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions tailored to your specific model.
Source:
– Source : ‘Honda Adaptive Cruise Control (ACC) | Honda Sensing | Vern Eide Honda’

How do you turn on cruise control on a Honda Pilot?

The Lane Keeping Assist system or lkas. Will be activated as well you can set the cruise speed when driving more than 25 miles per hour.

How do I activate cruise control on my Honda?

Press the ACC button on the steering wheel. The white ACC icon will become illuminated on your Driver Information Interface (DII). Set your cruise speed by pressing the “RES/+” or SET/-“. If your current speed is below 25mph then it will automatically set to 25mph.

How do I turn on cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system.

How do you turn cruise control on and off?

Stop cruise control whenever you need to.
If you are driving a manual, you can also disengage cruise control by pressing the clutch. If you are completely done using cruise control, you can press the “OFF” or “ON/OFF” switch. If your car has a cruise control “CANCEL” switch, you can also press that to stop it.

Can you turn off adaptive cruise control and use regular cruise control Honda?

Yes there is. Hold down the button that sets the distance while the system is not in use, and it will revert to normal cruise control. The green ACC light will go off.

How do you turn off Adaptive Cruise Control on a Honda Passport?

Right well there’s a quick way to turn that on or off. So you guys begin to know and there’s a visual cue. Let me show you what that looks like and how that’s. Done.

How do I know if my cruise control is on?

Switch on cruise control: Once you reach your desired speed (making sure it’s within the speed limit), turn on the cruise control system. In most vehicles, the buttons that control it appear on or behind the steering wheel, and a light will appear on your dashboard once it’s turned on.

How do you use cruise on a Honda?

You can control cruise control by pressing the Cruise Control Master Button on the steering wheel. On the instrument panel, a light displays CRUISE MAIN. It is desirable to cruise at a speed greater than 25 miles per hour (40 KPH). DECEL/SET buttons are located on the steering wheel.

How do I activate adaptive cruise control?

You’ll see the sensed vehicle indicator icon in the instrument. Cluster. The system will maintain the set distance until the driver ahead accelerates above the set speed moves out of your lane.

How do you use regular cruise control instead of Adaptive Cruise Control?

Here’s how:

  1. Press and hold the Cancel button.
  2. After a brief time, the icon in the cluster will switch modes.
  3. You’ll see a message in your cluster display that you have switched between cruise control and Adaptive Cruise Control.
  4. Pressing and holding the Cancel button will switch between cruise control modes.
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment