How do you turn on cruise control on a Chevy Cruze?

How to Turn on Cruise Control on a Chevy Cruze
To turn on cruise control on a Chevy Cruze, follow these steps:
1. Ensure the vehicle is in a forward gear and you have your foot on the brake pedal. Cruise control may not work properly if the camera is obscured or dirty.
2. Press the Set button while keeping your foot on the brake. This will turn on the cruise control feature.
3. Adjust the set speed by pressing the +/resume or -/Set button repeatedly until the desired speed is displayed.
4. Release your foot from the brake. The vehicle will hold its position.
5. To resume cruise control, press the resume button when traffic starts moving. The vehicle will automatically accelerate to the set speed or maintain a following gap if a vehicle is detected ahead.
Please note that cruise control should not be used in heavy traffic or on winding roads. It is important to always follow recommended speed limits and adjust your speed manually when entering areas with different speed limits.
If you encounter any issues or have further questions, it is recommended to consult the Chevrolet Cruze owner’s manual or contact your local dealership for assistance.
I hope this helps! Let me know if you have any other questions.

Why is my cruise control not working on my Chevy Cruze?

The most common reasons a Chevrolet Cruze cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.

Where is the cruise button?

How To Use Cruise Control. Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

Where are cruise control buttons?

Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board. Here are the basic buttons you can use to operate cruise control.

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

How do you turn on cruise control on a Cruze?

Press the Set button while your foot is on the brake to turn on the feature. You can change the set speed, still with your foot on the brake, by pressing the “+”/resume or “-”/Set button repeatedly until the system shows your desired speed.

Where is the cruise control in a Chevy Cruze 2013?

And that will set the cruise. Control and to resume the cruise. Control roll it up. If you want to cancel the cruise control you can use your your brake.

Where is cruise control on dashboard?

Step two: Switch on cruise control
In most vehicles, these buttons are on or behind the steering wheel. A light will appear on your dashboard once it has turned on.

How do you turn on cruise control on a 2013 Chevy Cruze?

And. Now you’re back to driving manually. If you want to resume the speed that you were going before with cruise control you hit the top button labeled resume and now your cruise control is set again.

How do you use cruise control on a Chevy?

You just press and hold again. And that’s going to switch you out to the Intel or the adaptive cruise instead so you can go adaptive versus standard cruise control just by pushing the button. There. I